Steve Braverman Posted November 15, 2008 Share Posted November 15, 2008 What are people's experiences with this? My garage is old, and the floor is stained all over. I'd like to paint it, but I'm concerned that it won't stick, and I'll have a bigger mess. Link to comment Share on other sites More sharing options...
zulaytr Posted November 15, 2008 Share Posted November 15, 2008 Steve,I moved to house 2 1/2 years ago and had the floor painted by Premier Garage. It remains just they way it looked the day they did it. They do come in and prep the floor by washing it and sanding it. The process is expensive but I am very pleased with the way it turned out. Prep is the key part of painting the floor. Good luck with it.Bob Link to comment Share on other sites More sharing options...
old car fan Posted November 15, 2008 Share Posted November 15, 2008 Steve,we painted our shop floor with poly.concrete paint.Washed it with acid,let dry .Holding up awesome.All the cars we have leak to some point,supposed to ,1914 being the oldest.If you research the epoxy coatings,they recomend a poly top-coat,because they hold up better to the gas and oils,so why spend the bucks for the epoxy?It,s been over a year,even under the lift is fine. Link to comment Share on other sites More sharing options...
Guest elmo39 Posted November 16, 2008 Share Posted November 16, 2008 why paint it unless it is to become a museumm or for display only and not a working garage .some years ago i cocreted (cemented )my driveway i did it so i woud not have crawl under my car on gravel or mud since then it has been slowly but surely stained by oil, paint staines , etc , my wife always says to do something about it , my reply is it was laid for the car and the stains add to the patina , (surface appearance of something grown beautiful, especially with age or use . Link to comment Share on other sites More sharing options...
old car fan Posted November 16, 2008 Share Posted November 16, 2008 A painted floor is much easier to keep clean. Link to comment Share on other sites More sharing options...
Durant Mike Posted November 17, 2008 Share Posted November 17, 2008 From what I understand the key to a durable finish is the cleaning of the concrete. All the oil and chemical stains must be neutralized prior to putting down any paint of finish. The U-Coat It people who make a well known floor covering sells some cleaner that must be applied to draw out the oil etc in concrete. Once water does not bead on the surface you are going to paint then it is ready. Everyone I've spoken to that has put down the U-Coat It product is 100% happy with it. But preparation is the key. Link to comment Share on other sites More sharing options...
old car fan Posted November 17, 2008 Share Posted November 17, 2008 I will bet u-coat is an epoxy,research well ,and they reccomend a polly top coat,so why spend the cash.The poly we put down,one day for the acid to dry ,one day painting.we use our shop,old cars all the time,in every bay.Why spend the cash for the epoxy. Durant is right about the cleaning,it must be done as with anything. Link to comment Share on other sites More sharing options...
Jay Wolf Posted November 18, 2008 Share Posted November 18, 2008 Oil isn't problem has anybody found a coating that will hold up to the steel wheels of a floor jack? Link to comment Share on other sites More sharing options...
Bhigdog Posted November 18, 2008 Share Posted November 18, 2008 I used an $80/gal 2 part epoxy on a new floor about 10 years ago. I acid etched and rolled on 2 coats. It's stood up to everything including steel wheeled jacks and loaded engine stands.........bob Link to comment Share on other sites More sharing options...
old car fan Posted November 19, 2008 Share Posted November 19, 2008 Tool boxes ,floor jacks ,gas oil ,engine stands,loaded,i will take my poly floor. Link to comment Share on other sites More sharing options...
Durant Mike Posted November 19, 2008 Share Posted November 19, 2008 Old Car Fan, I think your right. According to the manufacturer you clean the floor, keep it wet, put on the U-Coat It and if you want you can spread particles of color in it. Then you put on a clear coat. Where do you get the Poly paint for your floor, Home Depot? or Lowes? Is there a brand name? Just curious Link to comment Share on other sites More sharing options...
old car fan Posted November 20, 2008 Share Posted November 20, 2008 I researched it for about a year,im in the building trade as well,did my brothers shop with pure poly,The shop is somewhat part time(we both have a daily comentment)but are in the shop as time permits.Like i said on the earliar post,the oldest car is a 1914.They leak,no problems.I will send you the name brand thursday,you will not be upset with the product. Link to comment Share on other sites More sharing options...
Steve Braverman Posted November 20, 2008 Author Share Posted November 20, 2008 Thanks for all the replies. I saw the ad for U Coat it, and was intrigued. I definitely want to paint it with something. I'm curious as to what product old car fan used. Link to comment Share on other sites More sharing options...
Guest boettger Posted November 20, 2008 Share Posted November 20, 2008 Steve,Check out garagejournal.comThey have a forum topic on garage floors.More info there than any one person can comprehend! Garage Journal Link Link to comment Share on other sites More sharing options...
mrpushbutton Posted November 20, 2008 Share Posted November 20, 2008 I have painted several old floors, including a dealership building dating back to the 1940s that went through a prolonged period of "deffered maintenance" before we took possesion. The key to good adherance is preperation, as stated above. We used two part epoxy, had to scrape up wads of grease on the floor, power wash with an alkline degreasing solution (you won't have to do this, this was an extreme case of a filthy shop) mop a few times with water and ammonia, then mop with 50/50 mix of water and muratic acid, then paint. Be sure to follow the paint manufacturers instructions re: pot time before painting. We rolled floor jacks, hi-los, everything over that floor, no problems. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now