Guest edalfa Posted August 23, 2007 Share Posted August 23, 2007 My 40 Special is mostly original. I've only replaced the things that were typical maintainence items and those things that were unusable (and unrepairable). The dash plastic that was solid is still on the car. I've only replaced the ashtray on the right and the heat/def/inst trio on the left. The rest, especially the lighter and the ignition surround, are soiled and I want to clean them. Any recommendations? I don't want to treat them like modern pieces only to have them disolve from the cleaning agent.Ed Link to comment Share on other sites More sharing options...
Grandpa Posted August 23, 2007 Share Posted August 23, 2007 Ed, If you can remove the plastic part, try a soft toothbush and toothpaste with a lot of water. I use my wife's toothbush if she gets mad at me for speading too much time in the garage working on my vintage Buick. Grandpa Link to comment Share on other sites More sharing options...
Mark Shaw Posted August 23, 2007 Share Posted August 23, 2007 Good one Grandpa Link to comment Share on other sites More sharing options...
Guest edalfa Posted August 24, 2007 Share Posted August 24, 2007 Using toothpaste and a toothbrush sounds like a good idea. I'll give it a try. Ed Link to comment Share on other sites More sharing options...
buick840 Posted August 25, 2007 Share Posted August 25, 2007 I have used Autosol metal polish with great results.Comes in a tube like toothpaste and is similar to apply but has more abrasion (not too much) so will clean up plastic fittings very well. Used it on a 48 horn button with a plastic insert recently and it came up like new.I have used it on many different plastic fittings on early buicks and always had great results.And of course it good for the chrome as well.You can see it at this linkhttp://www.eastwoodco.com/shopping/produ...m_mmc=undefined Link to comment Share on other sites More sharing options...
Guest imported_arbys Posted August 25, 2007 Share Posted August 25, 2007 I've used Mother's Mag and Aluminum polish which can be purchased at your auto supply house $4-5. It also works great on modern dash speedo lenses, power tool guards and should work good on your dash pieces. Link to comment Share on other sites More sharing options...
BUKE Posted September 24, 2007 Share Posted September 24, 2007 Hi Brian.Thank you for your link.I just ordered a tube of it to try .Thank's Have a great BUICK day Frank Link to comment Share on other sites More sharing options...
mrpushbutton Posted September 24, 2007 Share Posted September 24, 2007 after you get the plastic clean, use 3-M Imperial hand glaze (Which I hope you are using on the body of the car!) on the plastic, you will be amazed at how good it looks. Link to comment Share on other sites More sharing options...
Oxnard Montalvo Posted September 24, 2007 Share Posted September 24, 2007 <div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body"> Using toothpaste and a toothbrush sounds like a good idea. I'll give it a try. </div></div>Don't forget to floss. Link to comment Share on other sites More sharing options...
Guest imported_Thriller Posted September 25, 2007 Share Posted September 25, 2007 You could also give Meguiar's PlastX a try. I doubt that it would truly be a problem for older pieces, but they are pretty good about knowing their products and would be glad to answer any questions you may have. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now