66400

And I thought $75 was already a great deal! Henry

All the Oldsmobile parts suppliers offer a nice repro grille emblem for the '66 442. Henry

'64 "A" bodies(including Sportwagons) are 4 3/4" while the full size and Riviera are 5" bolt pattern. Henry

Where in the world are you??????????? Henry

Looks like 6,552 production for '65's. Henry

Try this web site for spotlights. www.unityusa.com They produce spotlights and have application charts on their site. Henry

No, concealed headlights were not offered for fullsize '67 Buicks, only found on Rivieras. Henry.

Should note that the '66 and '67 2dr (2dr hdtps, converts and 2dr sedans) windshields are not the same. By the way where are you located? Henry

Vista Crusier springs will work/fit however may make your car sit too high. 98's will not. Henry

The windshield trim is different between the two years due to the '68 having a longer hood to conceal the wipers. Henry.

What I've surmised that if a car was assembled in Cal but intended for sale elsewere the heads were drilled, tapped and plugged, it will also have the tall oil filer tube. No other hardware present. If the Starfire has the mounting bracket for the reactor pump I'm sure it was originally equipped with the full system. I have 2 '66's that were assembled in Cal and they both have the K19 delete consisting of drilled, tapped and plugged heads and the tall oil filler tube. All my other '66's were built in Lansing are not tapped and drilled and carry the short oil filler tube. My '67 CHP 88 built in Lansing had the full Cal smog system as did any Olds sold in Cal. for '66 or '67. My thanks to Curt A. of Minn. who clarified for this for me a few years ago. Henry.

Thats a '66 Olds! Henry

Right now on eBay 2440599755 offered for sale is a '66-'67 trunk release with a good view of the jointed rod. Henry

The fenders are the same between 2dr and 4dr cars, however the wheel opening trim is styled differently. Henry

Looking for a radio delete plate for a '67 Olds 88. Thanks, Henry

'67 and '68 fenders are completly different and not interchangable. The doors MIGHT interchange less the glass. Henry

If you want to come to Austin I may have the parts you need on 2 '67 Olds parts cars. My '67 Delmont88 ex CHP police car has just arrived in Austin! Henry

You'll need the frame mounts that bolt to the crossmember from the full size Pontiac. Pontiac engine will bolt right up to your Olds transmission. Henry

A quick way to check is the 350 has a shift kick down cable, the 400 does not have a cable, you can see the cable by looking under the hood near the firewall heading down to the transmission on the passenger side of the car. Looking at the transmission pan under the car the 350 will be square shaped with a corner cut off. The 400 pan will be a free form shape with lots of curves. Henry

I saw that one on ebay a while ago it was a 2dr post model. Henry

The shaft of the mirror has 2 flat spots on it where a 1/4 inch open end wrench can be used to unscrew the mirror. Once the mirror head is unscrewed the chrome piece against the door comes off making the die cast bracket mounting screws apparent. Henry

All body parts are completly different between '65 and '66. '64 and '65 quarter panels are the same, '65 grille is by its self. You might chect with Mark in Elgin, Tx. for parts, he has about 25 '64 through '67 Skylark/Special parts cars. Phone # 512-303-0833. Henry

I think 1,000 bucks would be an all time record price for one! You can buy a whole car with a good hood for less money. I know I have. Henry

I believe they utilized a front door from a 4dr car, while the next door in line is a coupe door. Henry.

They are a steel wheel core with a bonded on rubberized face. Henry