jekeys1

I'm currently restoring a 1929 Reo Mate Phaeton, very rare car. We are in need of side engine cover/water jacket cover for a Continental 16E engine. Not sure if some other Continental's share the same part. Discovered some holes in the original after removing the rust scale. Any leads would be greatly appreciated. If I can't locate a part in the near future, we will just make one. Thank You, Jeff Keysor www.keysorautomobileworks.com 5893 State Route 20, Bouckville, NY 13310 315-893-7483

not from Buick Model 14

The 80" smooth grain from Restoration Specialties will work. I just got a sample and it is not totally smooth. Has a nice light grain to it. Thanks

Positive, I took the original off and still have it. One big piece

Thanks, 22' Reo Custom Aluminum Sedan Body, wooden roof and top material comes 2" down around all edges of roof.

Anybody have a source for T-66 Long Grain? or something similar that is just as wide. Lebaron Bonney has been waiting 2 years for this material, and I have been waiting 1 year. 64" wide isn't wide enough, anything wider and then we can talk details. Thank You, Jeff Keysor Bouckville, NY

Anybody have a source for T-66 Long Grain? or something similar that is just as wide. Lebaron Bonney has been waiting 2 years for this material, and I have been waiting 1 year. 64" wide isn't wide enough, anything wider and then we can talk details. Thank You, Jeff Keysor Bouckville, NY

Anybody have a source for T-66 Long Grain? or something similar that is just as wide. Lebaron Bonney has been waiting 2 years for this material, and I have been waiting 1 year. 64" wide isn't wide enough, anything wider and then we can talk details. Thank You, Jeff Keysor Bouckville, NY

PM Sent

Bump for new price... $50,000

Bump ttt

1905 Maxwell Model L Tourabout, Serial #49, one of the earliest known Maxwells. Restored to very high concours standards by a former HCCA Regional President 5 years ago, this is a very accurate and correct Maxwell. Every aspect of this car has been professionally refinished; engine, powertrain, chassis, upholstery, and sheet metal. More important than the visual appearance of the car, it also runs and drives very effortlessly and quietly, with no problem going 30mph down the road. If not familiar with this model Maxwell, it is the 1st model year for Maxwell, this car has a double opposed 2 cylinder engine measuring 4”x 4” each cylinder, making a total of 8hp. Planetary type transmission – two speeds forward and one reverse, propelling the car to a max speed of 35mph. The Maxwell is show ready as is, but one area that could be approved on is the brass. Some of the brass is original, so there are minor imperfections in the steering column and a couple of the lamps. If you wanted them to be 100% perfect, you would need to re-plate them. The radiator is all brand new, so that does not need any improvement. This is a stunning and beautiful car, pictures don’t do the car justice. Upon purchase, the new owner will get a folder full of documentation and sketches, compiled during the restoration process, as well as in process photos. I can help with shipping if needed. PRICE: $50,000 obo LOCATION: Shelton, CT CONTACT: Jeff 315-729-9968

Clark and I are working together to find one. I have left a few messages with Yeska and have not recieved any call back.

I am willing to purchase a full set if any are still available. I didn't see SOLD in any of the replies. Jeff

Want to buy a stone guard for a L29 Cord, havent been able to track any down. Help in locating one would be greatly appreciated. Jeff

Want to buy a stone guard for a Cord L29. Haven't been able to track any down. Any help would be greatly appreciated. Jeff

In need of a 2 barrel carb intake manifold.

Trying to find an intake manifold for 2 barrel carb setup. Does not need to be off a specific model of airflow.

I've been looking for a stone guard for a 31' CD8 for awhile with no luck. If you have one, or know someone with one they would like to get rid of, help me out. Thank You in advance.

I've been looking for a stone guard for a 31' CD8 for awhile with no luck. If you have one, or know someone with one they would like to get rid of, help me out. Thank You in advance.

I've been looking for a stone guard for a 31' CD8 for awhile with no luck. If you have one, or know someone with one they would like to get rid of, help me out. Thank You in advance.

I have a very nice 1910 Overland Model 40 Roadster I will be bringing to Hershey on Tuesday morning. The car will be located in the chocolate field, CI 75. Car is an older restoration, been in storage for 20 years before brought back to life this year. Has been a fun car to drive around these past few months, with it's very healthy 40hp engine. Priced to sell at $37,500, come by and make a deal before someone else does. Current Location: Shelton, CT Hershey Location: CI 75 Price: $37,500 Contact: Jeff 315-729-99six8

Friartuck, thanks for answering my initial questions, very helpful thanks.

Those are 2 good links. Didn't come across those ones yet.

Already did, not much luck.