broker-len

Please help me clean out my basement----------------contact at bobnroman@yahoo.com

THINK MAYBE ENGLAND------------------

I am going to paint my wheels like yours-----------------------what king of paint did you use polyurethane ?????

I have used lighter fluid for Grease stains on cloths and car seats------it has worked well for me

I think I originally asked for new gears----------the shop told me there was I clip that would be removed to take the gears out------when I got the gears I could not get the clip out shop told me to send to him and he would rebuild------------------when I opened it up last month I found the wrong drive gears since I am not sure what was in the pump originally so the reason for my post is-------A OWNER SHOULD EDUCATE HIMSELF BEFORE YOU PAY ANY ONE TO DO ANYTHING--and check when it is done------------------

this same---REBUILDER---------sold me a defected replacement cam gear and cost me to have to tear the front my car off and another $ 350.00 for a new one---------------------------the pump was too long ago ----I will think about telling him----but their no use

32 Plymouth---rebuilt motor-----have been having oil pressure issues-----the pump was rebuilt by a respected rebuilder----took the pump apart and found the wrong and worn drive gear and shaft and worn idler gear replaced with new parts,,,tightened all the lines going and coming from pump and it seems my problem is solved------------------------"IF YOU WANT ANYTHING DONE DO IT YOURSELF "

1932 Plymouth ---All black with tan interior--want to repaint the wheels----planing to use polyurethane-----either gray or cream was asked by paint shop if I want gloss or flat---------what would look better----------------thanks for your advise

the four cylinder plymouth has a unique flowing power under the water pump and end of trans if you compare a picture of the one you are replacing with the 4 cylinder it should be obvious

1961 shop manual $ 10.00 plus shipping-------------------bobnroman@yahoo.com

1960,,1966,,1968,,1973,,and chiltons Pro Tech's edition for 1992---------------------$ 10.00 a piece plus shipping---bobnromn@yahoo.com

1960,,1966,,1968,,1973,,and chilton's Pro Tech's Edition for 1992 $ 10.00 a piece plus shipping let me know I will put on E Bay-----------------------------bobnroman@yahoo.com

can you post a picture

Looking for a oil pump drive shaft -------316106-------------bobnroman@yahoo.com

looking for a oil pump drive shaft ------316106-----------4 cylinder motor

have some 32 plymouth parts

have a 32 PA Plymouth had it for 40 years low oil pressure motor rebuilt mains pored not sure of cam bearings still low pulled oil pump got new gears weighting for them do not think it is the gage but that is next was told thick oil is not the answer and I am a believer is 10w30 modern oil use pennsoil

did you see if Lynn steel has your rubber--------------may be with out seams got his product for my 36 Plymouth ,,the rear swing out windows-------real nice,,no seams

yes just found gears for my plymouth oil pump----reasonable price----easy web site

spoke with some one there----------------very nice----------they put modern oil in all their old cars-------------------thank you for the info

Paul--thanks do you have the owner's name ?------------I will call and put this to bed

the debate about detergent oil in old motors has been going on,,,,,I am in south jersey,,,,shop near me did the bearings,,,,their position is --------------------NEVER------------use detergent oil with pored bearings,,,,wanted some one else to ask

hilltownyankee@_________ Len Dawson in Washington good web site

looking for a shop that can pour babbit and line bore on early 30s motors

thank you I am aware of it----gears look beat up