finsruskw
Members-
Posts
154 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Everything posted by finsruskw
-
-
Just ran across a 47 Plymouth dash clock and need to test it for operation.. It would most certainly be 6 volt, but I am unsure if it would be negative or positive ground for testing purposes and I want to be sure I don't accidentally fry the thing when hooking it up. Anyone? Thanks! Dave Schwandt finsruskw@iowatelecom.net
-
I have 2 sets (pairs) of these for sale, listed on the original box as fitting all 1940 Desoto and Plymouth. This number is the same as 939718 and 858383 that fits 35-40 model cars as well. 1 pair is missing the bushings and the other is complete and has never been unsealed. $10 for the broken set and $30 for the unbroken set plus shipping from 52041 About 3 pounds per pair. Or I would take $35 plus shipping for all. Thanks for looking!
-
Need pictures of T&C mouldings C-47 & C-50
finsruskw replied to finsruskw's topic in Chrysler Products - General
Thank You!! That is a big help! Now, if I can just find a home for it!! -
Just like the title says. I need some good close up shots of the ends of right side fender mldgs , front and rear from C-47 and C-50 Chryslers I have several NOS Moldings for these cars and trying to get a positive ID for them. The one in question at present is about 65 inches long, die cast (5 lbs) w/8 studs and has 2 sets of part #'s cast into the back side 1303090 and 1308518. finsruskw@iowatelecom.net Thanks!
-
Still trying to figure out what this fits. Anyone have an idea?
-
I tried the vinigar route with several NOS plastic arm rest bases and it destroyed the color. I wound up with grey bases when they started out gold colr. Obviously the color was not through the plastic. I am now facing the same problem with some NOS pieces for a 1955 Plymouth. Parts are brand new but about 1/2 covered with mildew. However these appear to have the color (bluegreen) as part of the molded plastic and not baked/added/sprayed on after molding. Dave S.
-
NOS:49 Chrysler product axle shaft
finsruskw replied to finsruskw's topic in Chrysler Automobiles and Parts - Buy/Sell
#1137-240 still available @ $20 plus shipping from 52041 -
NOS parts to Carlisle
finsruskw replied to finsruskw's topic in Chrysler Automobiles and Parts - Buy/Sell
Splash shield #1903-692 is sold! Hood #1903-932 is sold! Rocker panel #1651-155 is sold Thanks!! Dave S -
Can deliver to Carlisle Deposit req'd befor loading All parts are NOS! Always stored inside! PM me for price/photos 2445-300 '65 Chrysler lower radiator splash pan 1903-692 '60 Dodge splash shield 1964-129 '60 Plymouth 4dr hdtp lf rear door assly 2493-425 '65 Chrysler 4 dr sedan lt rr door assly 894-486 '39 Dodge lower A-frame 1318-178 '40-41 Chrysler DeSoto '6' A frame 1964-132 '60 Dodge Seneca-Dart rt rear door assly 2259-163 ' 61 Lancer driver door 2 dor sedan assly 2253-116 '63 Dodge exc 880 Hood Thanks! Dave S
-
Lower control arm, NOS fits 39 Dodge $50 plus S&H from 52041 Can deliver to Carlisle with $25 down payment. Tried to load pictures w/no luck. Can e-mail upon request Thanks! Dave S
-
Due to my 300-F having laid down big time on me I will be driving my pick-up to carlisle this year and will be able to deliver any or all of the following parts to Carlisle in July. I will be with the 300 group, just down the street from the FL tent. Require 50% down pmt, balance due upon reciept at Carlisle. Photos available. I will not bring anything that does not have a down payment, prices include shipping to Carlisle. All parts are NOS. Sheet metal is in factory primer. Check your parts books. P= Plymouth, D=Dodge, S=DeSoto, C=Chrysler, Y=Imperial 1137-240 Axle shaft, 30-5/8" long 10 splines 49 D S C '6' & 49P $75 1137-137 " " 32-1/4" long 10 splines 37-48 some $75 (2 available) 1137-136 " " 32-1/4" long 10 splines 37-48 some $75 (2 available) 1304-453 Door skin LF Frt 49-50 P $50 1544-850 door skin LT RR 55 P $50 1618-525 1 pair coil springs 56 P 3 pass coupe $75 pr 1635-957 torsion bar, LH 44-5/8" long 57-58 P D S $125 ea. (3 available) 1651-155 Left Rocker panel, 57-8-9 Y 4drs $100 1730-825 Brake drum & Hub assly, 11", lt frt 57-58 S Firesweep $50 1733-932 Cyl head, RT V-8 W/air suspension 57-61 Many app's $100 1781-357 & 358 pair door step plate and panel 60's Dodge Truck $175/pr will not separate 1832-524 Lower radiator splash shield 59 D $80 ea. (3 available) Mint used grill assly (3 pc) 57 Chrysler Windsor $150 1903-692 Splash sshield 60 D exc Dart $80 1903-932 Hood, all 60 D $150 1963-787 1/4 panel, inside right rear, sedan 60 Seneca & Dart club sedan $80 1964-132 Door assly, rt rear sedan 60 D Seneca & Dart $150 2093-790 1/4 panel extension 61 D & Dart $75 2259-163 Door assly, driver, 61 Lancer 2 dr sedan $150 Thanks! Dave S
-
If its a 300K it will/should have a 413 and should be stamped V41 HP The 300 "Sport" used the 383 and the Newports came equipped with the 361 Dave S.
-
1949/50 Chrysler parts
finsruskw replied to WindsorRon's topic in Chrysler Automobiles and Parts - Buy/Sell
They look to be fender mldgs I can locate thgem and post some pics. Dave S -
1949/50 Chrysler parts
finsruskw replied to WindsorRon's topic in Chrysler Automobiles and Parts - Buy/Sell
I have several NOS moldings for a 49 Chrysler part #1256-516 and #1296-952 I'd like to find a home for. Photo available upon request. Dave S. -
Photos are now posted. The 1st one is #951-299 and is still a sealed box. I did not want to open it. I hope you can read the part #'s on th rest of them. Thanks again!
-
I have the following tie rod ends NOS for sale. Part #s 951-297, 298, 299, 300, 301, and 304 All are listed as fiting the 36-38 Plymouth and Dodges. Some fit 37-39's Have multiples of some #'s $25 each plus shipping from 52041 Thanks!! Dave S.<!-- google_ad_section_end -->