Dodge1934

Thanks for looking... This item is now SOLD

Thanks for the information. I will give that a try and report back as it warms up.

I like many of the above posts. Reclaiming damaged or rotting wood with one of the epoxies is great. An important point mentioned at the beginning of this thread is that some joints should not be glued with Epoxy as they do not allow for enough flex in the body. I think that is an important point to consider when assembling you wood frame. I have used an epoxy sawdust mixture to fill in or reshape specific pieces and that seems to work as well. I have been working on a 1919 Mcalughlin which had very little wood left in it when I started so there was a fair bit of guess work that went on

I have a rad shell with the badge still attached to the front. The shell is very rusted and I want to take off the badge without ruining it, restore the shell and then reassemble it after. It is a 1923 Mcalughlin rad shell. the badge is somehow fastened to a circle piece on the rad shell. My thought is to get a piece of pipe and tap on the circle to pop the badge off the other side... I assume I would need to glue it back in to reassemble. Does anybody have experience with such things?

I have parts of 3 Northway engines available. They were used by Mclaughlin and Oakland along with several other makers. A picture of one of the engines is attached but not all of the parts seen are available... I needed them for my car. The Generator, starter and distributor are gone. some of the parts available include transmission. clutch, head, water pump, the block, Oil pan, oil filler cap, dip stick, oil pump, What do you need. Prices range from $10.00 to $50.00 per part plus shipping from Canada Package deals available.

bump

bump

I have several Marvel Carburators. 2 are posted here. They both have the same size throats but there are differences. please see pics and if you need a different angle please ask. They are mainly for parts but these two may be restorable Buy one or buy both they are $75.00 each US funds plus postage from Canada

This is an early Stewart Warner speedometer. It appears to work with no issues. It is a 3 inch diameter and the stem is 3" from the stem base. The part number on the back is P32845 It is $60.00 US funds plus postage from Canada

This is a large brass oiler. it is complete but needs new gaskets at the ends of the glass barrel. The glass barrel is in good shap with no cracks or chips. The glass barrel is 3 " dia and just under 3" tall. The unit is made by "Michigan Lubricator Co" and there is a number 487 stamped into the top. The price is $70.00 US funds plus postage from Canada

This is a tail light from the teens or early 20`s . It would have been a single tail light that likely mounted in the center of the spare tire. Would look good on an Oakland, small Buick or similar type car. The price is $50.00 US Funds plus Postage

I am told this is off a Franklin but look at the pictures. It seems to be in good working condition but is incomplete. Excellent as a parts unit. The price is $60.00 US funds plus postage from Canada On picture shows numbers scratched into the back... maybe parts number

I am picking up from Mike this weekend (March 4 2017) and coming back to Northern Alberta. I have room for one more engine if anybody needs one brought back... just help pay for a bit of the gas... you make the deal with Mike on the engine... send me a PM if interested.

I am interested in what he has for Northway engine and have sent him a note requesting further details

These tires are now sold. I do have extra tubes if anybody is interested I can send pics if anybody is interested. $20.00 each I have 8 tubes o 4 are Atlas brand 4 are General tire brand

Bump

Bump

Looking for 6 NOS spark plugs exactly like the one pictured below... Will buy one or more.AC but nothing else from 20`s perhaps early 30s Will also consider similar style and age but those would need to be priced right for me to have interest. Interested in AC and Champion and Green Splitdorf

bump

let me dig them out and I`ll get back to you with details and a pic of these plugs. Ric I sent you a private message with further details. Let me know if you have other questions. Thanks

Below is a list of vintage Autolite spark plugs the first column is the spark plug number the second column is the approximate number I have of that type. the list is in alphabetical order or rising number. 14 mm plugs are $5.00 each 10 & 18 mm plugs are $8.00 each 7/8 inch spark plugs are $10.00 each all in US funds freight is extra purchases over 100 plugs will get a discount to be discussed. AUTOLITE 104 16 106 8 605 5 724 9 725 8 726 3 727 6 744 48 784 23 2543 4 2932 18 3246 120 3264 30 3265 12 3267 34 3286 12 3325 15 3364 14 3383 22 3384 18 3464 6 3465 33 3485 76 3545 28 3547 48 3627 80 3647 41 3885 20 3895 19 3924 24 3986 21 4025 36 45 5 46 17 5125 4 66 8 745 15 746 9 747 27 764 3 765 5 766 2 85 4 4GS150 3 4GS175 6 4GS200 17 4S140 22 4S165 22 4S250 29 A11 40 A11X 35 A23 18 A3 20 A32 25 A32B 20 A3X 9 A42 38 A5 76 A5/AN5 16 A52 82 A52B 10 A5X 8 A7X 15 A82B 15 A9 20 A9X 15 AE10 17 AE3 23 AE42 10 AE4B 19 AE6 47 AF32 50 AF4 14 AF42 10 AF52 81 AG12 5 AG2 41 AG22 27 AG3 45 AG32A 21 AG3B 12 AG4 27 AG42 66 AG5 18 AG52 16 AG7 21 AGR21 38 AGR31 25 AGR32 4 AGR41 62 AGR42 29 AGR51 46 AGR52 13 AGR82 22 AGRF32B 10 AGRF52 19 AGRF52 28 MOTORCRAFT AGRF52B 10 AH4 18 AH8 10 AL5 32 AL7 40 AL7X 2 AR32 20 AR41 6 AR42 10 AR52 60 AR80 95 AR82 170 AR826 30 AR82B 9 ARF22 3 ARF22B 7 ARF32 14 ARF42 26 ARF52 33 ARF526B 10 ARF62B 6 ARF8 39 ARF86 10 ARF88 52 ARF8B 10 ARL52 15 ARL8 22 ARL82 11 ASF34 10 MOTORCRAFT ASF42 14 AWRF325 10 B11 56 B3 11 B3W 4 B5 10 B7 38 B9 20 BF09 7 BF32 5 sold to be confirmed BF42 37 BF42B 50 BF7 10 BF82 72 BF92B 20 BR31 20 BR314B 20 BR8 9 BRF31 5 BRF32 11 BRF42 25 BRF6 8 BRF8 4 BRF82 146 BRF82B 18 BSF42 5 BSF44C 4 BSF82 12 BSF92 15 BT4 11 BT6 16 BTF3 33 BTF31 42 BTF31B 22 BTF42 30 BTF42B 35 BTF6 9 BTRF42 17 BYSF314 8 J12 35 L4G 4 MISC 226 MISC 28 MOTORCRAFT N4 5 N4G 10 P4 20 P6 87 PR4 10 PR6 25 T5 24 TH4 24 TH8 7 TT10 6 TT15 9 TT4 66 UJ4J 5 4643

Below is a list of vintage Autolite spark plugs the first column is the spark plug number the second column is the approximate number I have of that type. the list is in alphabetical order or rising number. 14 mm plugs are $5.00 each 10 & 18 mm plugs are $8.00 each 7/8 inch spark plugs are $10.00 each all in US funds freight is extra purchases over 100 plugs will get a discount to be discussed. AUTOLITE 104 16 106 8 605 5 724 9 725 8 726 3 727 6 744 48 784 23 2543 4 2932 18 3246 120 3264 30 3265 12 3267 34 3286 12 3325 15 3364 14 3383 22 3384 18 3464 6 3465 33 3485 76 3545 28 3547 48 3627 80 3647 41 3885 20 3895 19 3924 24 3986 21 4025 36 45 5 46 17 5125 4 66 8 745 15 746 9 747 27 764 3 765 5 766 2 85 4 4GS150 3 4GS175 6 4GS200 17 4S140 22 4S165 22 4S250 29 A11 40 A11X 35 A23 18 A3 20 A32 25 A32B 20 A3X 9 A42 38 A5 76 A5/AN5 16 A52 82 A52B 10 A5X 8 A7X 15 A82B 15 A9 20 A9X 15 AE10 17 AE3 23 AE42 10 AE4B 19 AE6 47 AF32 50 AF4 14 AF42 10 AF52 81 AG12 5 AG2 41 AG22 27 AG3 45 AG32A 21 AG3B 12 AG4 27 AG42 66 AG5 18 AG52 16 AG7 21 AGR21 38 AGR31 25 AGR32 4 AGR41 62 AGR42 29 AGR51 46 AGR52 13 AGR82 22 AGRF32B 10 AGRF52 19 AGRF52 28 MOTORCRAFT AGRF52B 10 AH4 18 AH8 10 AL5 32 AL7 40 AL7X 2 AR32 20 AR41 6 AR42 10 AR52 60 AR80 95 AR82 170 AR826 30 AR82B 9 ARF22 3 ARF22B 7 ARF32 14 ARF42 26 ARF52 33 ARF526B 10 ARF62B 6 ARF8 39 ARF86 10 ARF88 52 ARF8B 10 ARL52 15 ARL8 22 ARL82 11 ASF34 10 MOTORCRAFT ASF42 14 AWRF325 10 B11 56 B3 11 B3W 4 B5 10 B7 38 B9 20 BF09 7 BF32 5 BF42 37 BF42B 50 BF7 10 BF82 72 BF92B 20 BR31 20 BR314B 20 BR8 9 BRF31 5 BRF32 11 BRF42 25 BRF6 8 BRF8 4 BRF82 146 BRF82B 18 BSF42 5 BSF44C 4 BSF82 12 BSF92 15 BT4 11 BT6 16 BTF3 33 BTF31 42 BTF31B 22 BTF42 30 BTF42B 35 BTF6 9 BTRF42 17 BYSF314 8 J12 35 L4G 4 MISC 226 MISC 28 MOTORCRAFT N4 5 N4G 10 P4 20 P6 87 PR4 10 PR6 25 T5 24 TH4 24 TH8 7 TT10 6 TT15 9 TT4 66 UJ4J 5 4643

Is the blanket made of Horse hair on the black side?

I have a rim wind car clock from from the late teens it likely needs a cleaning and other general repair but the thing that concerns me are the threads where the winding rim attaches to the clock the threads are worn and the rim threads jump channels when you try to wind it... is that something that can be fixed?

I have 4 tires with tubes for sale. they are NOS and were made in Canada by General Tire. they have been stored well and the rubber in not aged at all. the tubes are in sealed original boxes that have not been damaged.. This should avoid the challenges folks have had with some of the new production from India The tires are $100 US funds per tire and tube plus freight. They are an unusual size if anybody knows what they fit please post that information here. as per the pictures the tire size is 4.75*20 and or 5.00*20 I have pics of the sealed Tube boxes but i was at my size limit... they are Atlas brand and made in Canada