[Wanted: 1937 Studebaker or Plymouth/dodge tail light Bezels]

Let me check. Had both bezel and lens extra but may have gone with other 37 pieces to another. Also a bezel on eBay but not sure it is 

37 Studebaker???? Anybody confirm??

[1937 steering wheel puller]

Do I need a special puller to get the steering wheel off the post? I need to send the gear in for refurbishment/rebuilding. I have had the wheel off years ago but forget what I used then. 

[Shrock recast steering wheels for sale]

My 37 Gray Steering wheel is outstanding. Thanks Shrock Bro’s. 

[1937 steering gear]

I still have some “wander” in my 37 CE steering. Not there in my 6A coupe.. Front end shop says all is fine from end of steering gear to wheels?????
Any  info out there on what might be going on internally?  

[1937 Studebaker J5 express]

I know a CE owner who would buy the grill- another the seat bottom and back if still   there on  the junker.  Let me know here. 

[1937 Studebaker Headlight parts]

If Robert can’t help you I will see if I have a spare. No guts though. Good luck on that score. Maybe somebody out there who rodded  a 37 will have saved the parts. 

[Studebaker coupe express]

Good luck!
paid $10 for mine 35 years ago out of a Western Colorado field- no wheels. Spent a couple of bucks on getting it done ($$$$) and wouldn’t part with it. 
 

[Brake Drum 1937]

Hi AussiJohn, 

oh I had lots of trouble as the enclosed rear portion of the left cable was frozen big time. Patience and regular application of PB Blaster over 2-3 weeks finally freed it. It works great now and I have an inch or so of adjustment left in both turnbuckles. The problem is when I tighten it so the hand brake actually holds- it is at least partially full time contact with heat buildup after a very short drive. I think it has to be the drum at this point. 
Thanks for your note. 

[Brake Drum 1937]

Still confused. RBK says his is passenger side. Are driver side/passenger sides different?

[Brake Drum 1937]

Robert,

Does that mean there are two different drums. 
whatsize is yours. 
save it!

[Brake Drum 1937]

The issue is that I don’t notice a pulsing pedal BUT I cannot adjust the hand brake to firmly hold the car without it being too tight and a good shop has tried to adjust it ( after I couldnt) and said the problem in their opinion was an out of round drum. I do have the frame off of the original Coupe Express ( I used a parts car 6A frame for better ride)  so access to rear drums if needed. 

[Brake Drum 1937]

My shop says my left rear drum is out of round. What can I do? Can it be too far out of round? 

[HORN REPAIR]

My 37 Coupe Express had 0 horn. Followed a YouTube video and simply cleaned the ‘points’ and viola they work great. Try that if you already haven’t.

[Hey Gary Ash]

LOL Gary. 

[Hey Gary Ash]

Somebody is trying to find you on Studebaker Trucks Only site . Fyi

[Studebaker and FRAM]

Did that conversion myself on my 37. Then I find out from my engine rebuilder that those old filters did little to filter the oil and just not bothering at all is just as good with modern oils. Anybody disagree?

PS I would love for somebody to reproduce the decal! 

[Don Aust]

Agree. Do not open. I send no emails to members of forum without prior agreement.

[1937 Fuel Pump]

Thanks friends. Yes it was “new” in the box but years old. Ordered regulator from Summit. Where the heck do I install it? I know between mechanical pump and carb but where can I attach it?

[1937 Fuel Pump]

Two things: 

1. Today, driving in my Coupe Express, it started running poorly then just quit. I pulled over to the side, perplexed, and decided to turn the switched electric fuel pump on. It ran, and engine

restarted immediately . So is my fairly new NOS regular fuel pump shot?
2. I got home stopped to open garage door, and fuel was coming out of float bowl. So is the electric pump too strong?
can I get a regulator to turn it’s pressure down?

Thanks all, as usual. 

[Need rebuilder recommendations for Stromberg carb]

Those are beautiful. Thanks!

[Need rebuilder recommendations for Stromberg carb]

Thanks friends. Gary: please send a pic of finished work- final color is important. 

[Need rebuilder recommendations for Stromberg carb]

Anyone have a good reliable carb rebuilder in mind?
Planning a rebuild on my Stromberg EX-23 soon and would like to avoid getting scammed. ( fits 37 Dictator and CE.)

[Can 1933 vacuum wiper reliability be improved?]

I tried lubrication like my dad taught me years ago- squirting oil in vacuum inlet. Did no help. 

I tried removing it and rebuilding it with new eBay gaskets. Nope. 

I sent it in to the Wiperman (Ficken Wiper Service). It is like new. 

 

[Door aligner needed]

Saw a bunch just advertised- maybe for you - for sure many years same item

eBay?
Try Stude International (look online) orseveral others. 
Two per door? Hmmm 

oops ones I see are ‘36-54. Sorry

[Why wouldn’t my 37 CE start?]

I did not know the distributor timing adjustment and hold down could move. It is a ring right below the vacuum advance ring and if slightly loose can move. Moved it around distributor base to have rotor pointing at #1 while at just before TDC (UDC for purists),  and viola. I just assumed that it could not would not move. Does this make sense?