Guest imported_PackardV8 Posted February 14, 2007 Share Posted February 14, 2007 To Speedster and others:Please DO NOT jump to conclusions. I've recieved NO confirmation from T'Pacman of any such request.Ever since the old ClassicCar.com days (long before we came to the AACA) there has been certain specific marque clubs and related vendors trying to stop any discussion groups that do not operate under their auspices. Deleting your posts voluntarily is only playing into the hands of those that would like to see independent Packard discussion discouraged. Link to comment Share on other sites More sharing options...
Peter J.Heizmann Posted February 14, 2007 Share Posted February 14, 2007 Folks...I take full responsibility for any and all inconvenience to the Packard Forum partipants.Should Eric's posts have remained -- On hindsight, yes. For this, I apologize.The Packard Forum is not going anywhere, rest assured.--------------------------------------------------Received the following request via PM from Eric on 2/13:--------------------------------------------------Can you please delete my account here? Thanks, Eric --------------------------------------------------Peter J. Heizmann Link to comment Share on other sites More sharing options...
Restorer32 Posted February 14, 2007 Share Posted February 14, 2007 Every message board, club or organization I have ever been associated with has had its share of individuals who thrive on drama. Peter has accepted full responsibility for the inconvenience of deleted posts and likely will handle the situation differently in the future. Now let's move on, shall we? Link to comment Share on other sites More sharing options...
Guest imported_Speedster Posted February 14, 2007 Share Posted February 14, 2007 If your house burns down, you don't go back and look at the ashes everyday, so I won't be back anytime soon. To all that have helped me, over the past couple years, I want to say 'Thank You'. Link to comment Share on other sites More sharing options...
Tom M Posted February 14, 2007 Share Posted February 14, 2007 Rick,You and others have helped me out quit a bit on my project. So please take this thank you personally for helping me out and if you please can I get your email so we can stay in touch.You can email me at dadspackard@aol.com Link to comment Share on other sites More sharing options...
Packard8 Posted February 14, 2007 Share Posted February 14, 2007 Bummer Rick, not sure what happened, but it looks like someone went after a mosquito with a double-barrel 10 gauge.Always appreciate your good info, stick around! Link to comment Share on other sites More sharing options...
tbirdman Posted February 14, 2007 Share Posted February 14, 2007 Well what is done is done but a lot of good infomation was lost. <img src="http://forums.aaca.org/images/graemlins/frown.gif" alt="" /> I use the search engine quite often to research subjects. But I guess we'll survive. Link to comment Share on other sites More sharing options...
Peter Gariepy Posted February 14, 2007 Share Posted February 14, 2007 Again, I apologize for a moderator's unintentional mistake. Had I been able to fix this problem I would have, but that was not possible.The vast majority of the problem revolved a very long "blog" thread. The forum was never intended to be used that way. Unfortunately my warnings of problems using the forums this way went on deaf ears.We have put new procedures in place to prevent this problem from occurring again in the future.Peter Link to comment Share on other sites More sharing options...
Peter Gariepy Posted February 14, 2007 Share Posted February 14, 2007 please post any replies to this thread in the following:http://forums.aaca.org/showflat.php?Cat=...ge=0#Post444040 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now