pughs Posted June 2 Share Posted June 2 Does anyone know year and make these sun visors came from? Thanks in advance for your help. Link to comment Share on other sites More sharing options...
pont35cpe Posted June 2 Share Posted June 2 They look like `36 Buick 40 series. And `35-`36 Pontiac. Link to comment Share on other sites More sharing options...
pughs Posted June 2 Author Share Posted June 2 Thank you. I thought that they were mid-30's GM but was hoping that someone had more specific information. Link to comment Share on other sites More sharing options...
pughs Posted June 2 Author Share Posted June 2 What kind of fixture or bracket does the pointy end (on right in last picture above) fit into? Link to comment Share on other sites More sharing options...
Bloo Posted June 2 Share Posted June 2 It's an oval chrome thing in the ceiling with a round hole you poke that in, or you can pull it over to the side window and poke it in another one over the door opening. The hardware on these do not match my 36 Pontiac, but I believe it may match SOME 36 Pontiacs. It might interchange even if the hardware doesn't match? There seem to be a zillion mid-year changes on 36 Pontiacs. As @pont35cpe mentioned, 36 Buick 40 is another good possibility. They might even be the same parts as early 36 Pontiac? Link to comment Share on other sites More sharing options...
pont35cpe Posted June 2 Share Posted June 2 8 hours ago, pughs said: What kind of fixture or bracket does the pointy end (on right in last picture above) fit into? Link to comment Share on other sites More sharing options...
pughs Posted June 2 Author Share Posted June 2 Do you know of a source for these brackets? Link to comment Share on other sites More sharing options...
pont35cpe Posted June 2 Share Posted June 2 37 minutes ago, pughs said: Do you know of a source for these brackets? Hard to find. Show up on ebay occasionally. Link to comment Share on other sites More sharing options...
pughs Posted June 3 Author Share Posted June 3 Thank you for your help. Link to comment Share on other sites More sharing options...
pughs Posted June 7 Author Share Posted June 7 I need to take the swivel connections off of one set of visors and put them on another. I removed the screw but the piece is not coming off of the shaft. I don't want to apply too much pressure because I am afraid that the part may break. Is there a way to remove them without doing damage? Link to comment Share on other sites More sharing options...
pont35cpe Posted June 7 Share Posted June 7 With the screw out, use a thin bladed flat screw driver, insert into the groove at the hump out, tap it inward. Then, twist and pull, they should separate. Link to comment Share on other sites More sharing options...
pughs Posted June 16 Author Share Posted June 16 pont35cpe It worked!!! Thank you. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now