MrLiken Posted October 19, 2023 Share Posted October 19, 2023 Hello all, I will update the status of my engine problems back on the original thread, but the engine is out. Years ago, I had the clutch relined locally (San Diego) with Kevlar material. I have to say that during the past few months, the gears have never shifted better. Upon removing the engine, I found that about 1/4 of the Kevlar material had broken off. Maybe that's why it shifted so well?? I am now looking for referrals, to send my cone clutch to for relining with leather. I am told there was a fellow in Orange, CA (Bob Knaak) that did leather relining, but I am unable to reach him. Probably no longer in business. Any suggestions are appreciated. 1 Link to comment Share on other sites More sharing options...
cudaman Posted October 19, 2023 Share Posted October 19, 2023 Saw this online, I have no experience with them: https://fortwayneclutch.com/product/cone-clutch-14-5-cone-clutch-relining-refurbishing-labor-cone-clutch-rebuilder/ It will help if you have specifications on the thickness of the original leather material when it was new. If the rebuilder installs leather that is too thick, the clutch may not release. 4 Link to comment Share on other sites More sharing options...
nearchoclatetown Posted October 20, 2023 Share Posted October 20, 2023 If you have a Dyke's manual read the section on cone clutches and also read Harry's 3? part articles in the DBC magazine. There is a rebuilder selling cones lined completely wrong. Know what you want before giving yours to anyone. 1 Link to comment Share on other sites More sharing options...
MrLiken Posted October 25, 2023 Author Share Posted October 25, 2023 On 10/19/2023 at 1:51 PM, MrLiken said: Hello all, I will update the status of my engine problems back on the original thread, but the engine is out. Years ago, I had the clutch relined locally (San Diego) with Kevlar material. I have to say that during the past few months, the gears have never shifted better. Upon removing the engine, I found that about 1/4 of the Kevlar material had broken off. Maybe that's why it shifted so well?? I am now looking for referrals, to send my cone clutch to for relining with leather. I am told there was a fellow in Orange, CA (Bob Knaak) that did leather relining, but I am unable to reach him. Probably no longer in business. Any suggestions are appreciated. Great news for me here. Bob Knaak is still relining and was just out on tour. I was able to reach him by email. Keep all updated on progress. Link to comment Share on other sites More sharing options...
MrLiken Posted November 16, 2023 Author Share Posted November 16, 2023 Great news. Bob Knaak is still doing leather clutch relining in Orange, CA. He is working on restoring my clutch back to original. Link to comment Share on other sites More sharing options...
Jack Bennett Posted December 5, 2023 Share Posted December 5, 2023 On 10/19/2023 at 1:51 PM, MrLiken said: Hello all, I will update the status of my engine problems back on the original thread, but the engine is out. Years ago, I had the clutch relined locally (San Diego) with Kevlar material. I have to say that during the past few months, the gears have never shifted better. Upon removing the engine, I found that about 1/4 of the Kevlar material had broken off. Maybe that's why it shifted so well?? I am now looking for referrals, to send my cone clutch to for relining with leather. I am told there was a fellow in Orange, CA (Bob Knaak) that did leather relining, but I am unable to reach him. Probably no longer in business. Any suggestions are appreciated. For me, anyway, the AACA forum is a constant source of information, regarding old cars, from the soldiers on the front line of vehicle possession and restoration. I will never own a 1915 DB Touring with a cone clutch. But I do have a transmission with, what I have been told, is part of a cone clutch attached. This is a curious device which whets the appetite for more knowledge concerning its use and mechanics. While you have it out, and possibly disassembled, would you please post some photos of a complete cone clutch with a brief explanation of how it works? Link to comment Share on other sites More sharing options...
nearchoclatetown Posted December 5, 2023 Share Posted December 5, 2023 Jack, you say you are a DBC member. There was a series of three articles about a year ago on the cone clutch in the club magazine. Link to comment Share on other sites More sharing options...
Minibago Posted December 6, 2023 Share Posted December 6, 2023 Hi Jack, This is an example of a cone clutch plate from a 1915 DB. This is a diagram (not Dodge Brothers) of a complete unit to show how it works, simply in and out faced with the inside of the tapered (cone shaped) flywheel. 3 Link to comment Share on other sites More sharing options...
Jack Bennett Posted December 11, 2023 Share Posted December 11, 2023 (edited) That’s what these forums are all about Minibago. Thanks for the response and helpful information. I am a member of a few clubs which are dedicated to the restoration and collection of old machinery, and they do provide a wealth of information. But, behind the neatly typed, and meticulously organized, reams of information, some good, some not so good, there is a human being which possesses a million more bits of information, and first hand knowledge, for whom the the forum was organized. And I still like that human interface in the same manner as I dislike Dykes Encyclopedia in that I can have a discussion with another human, but printed media is a one way communication. As with every other facet of my many faceted life though,I tend to pay more attention to the things with which I am involved in at the minute, or have a momentary infatuation with something I can’t quite put a finger on. I don’t, and probably never, will own a vehicle with a cone clutch, but that doesn’t mean I don’t want, or need to know more about them. My appetite for more information regarding the cone clutch grew the day I brought the 1929 Fargo Express panel home for the first time, and I discovered the transmission in its bed neither fit my truck, or any other truck I’d ever seen. This occurred only a month ago, and prior to that time a 1915 DB cone clutch ranked among chariot wheels and ox cart maintenance as a matter of immediate concern. I will never use either the transmission, or the attached cone clutch. However, as with anything else which weighs a ton and will need to be dragged around as long as I own it, I like to know as much about the cadaver I’m having to drag around as possible. And, now, thanks to the information you’ve afforded me, if you want the transmission and clutch, and are willing to pay the shipping to get it, it is a matter of respect when I tell you what the clutch ISN’T, and while you can have it, you’ll be wasting your time and money to get it. Edited December 11, 2023 by Jack Bennett (see edit history) 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now