Karejorgen Posted June 25, 2023 Share Posted June 25, 2023 I am looking for a 1927 Dogde brothers fast four waterpump. Attached to the rear of the engine block and should have a axle going forward to the generator Link to comment Share on other sites More sharing options...
Karejorgen Posted August 5, 2023 Author Share Posted August 5, 2023 Still looking if anyone wpuld have a spare Link to comment Share on other sites More sharing options...
Karejorgen Posted January 5 Author Share Posted January 5 Still searching for a waterpump if someone got 1 Link to comment Share on other sites More sharing options...
nearchoclatetown Posted January 5 Share Posted January 5 What is wrong with yours? Do you have a picture? Where have you looked so far? 1 Link to comment Share on other sites More sharing options...
Karejorgen Posted January 8 Author Share Posted January 8 My pump is missing, it is mounted in the side of the block all the way back against the clutch housing and driven by shaft from the generator after the pics I have seen online. Have been thru this forum some dodge brothers groups on facebook, ebay and prewarcar.com looking for one Link to comment Share on other sites More sharing options...
nearchoclatetown Posted January 9 Share Posted January 9 If you've already contacted Romar and Myers try the Montana Dodge Boys. They all have websites. Link to comment Share on other sites More sharing options...
Karejorgen Posted January 9 Author Share Posted January 9 Okey, I wil try them😀 Link to comment Share on other sites More sharing options...
robert b Posted January 9 Share Posted January 9 Is this car a 124 or 128 as there are two pumps used on these cars . Link to comment Share on other sites More sharing options...
Karejorgen Posted January 13 Author Share Posted January 13 attached of the engine. The engine is living in an international truck. It was changed out in the 40-50s. Idont have any more info about the engine or the car it came from. Link to comment Share on other sites More sharing options...
The Graham Posted January 13 Share Posted January 13 I have one but it needs considerable work. Attached is a picture of it. Things that it needs: Housing has a crack that will need to be welded, need new main shaft, needs grease fitting, needs drain valve, inside of cover plate will need to be filled with epoxy material due to rust. If you have no other leads and can do the repairs this could work Ed Link to comment Share on other sites More sharing options...
Karejorgen Posted January 13 Author Share Posted January 13 This is the only lead so far that is giving a pump for result I want to buy it if you can ship it. Link to comment Share on other sites More sharing options...
The Graham Posted January 14 Share Posted January 14 In looking at your picture of your engine are you also needing the connecting shaft from water pump to the generator and the rubber joint connectors? Link to comment Share on other sites More sharing options...
Karejorgen Posted January 14 Author Share Posted January 14 That is correct it was always the pump as nr 1 priority as the can me made. But always easiest to get one complete Link to comment Share on other sites More sharing options...
The Graham Posted January 14 Share Posted January 14 If you have email can you message me your email address so it’s easier for me to send pictures? Thanks, Ed Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now