Craig Janakos Posted October 6, 2022 Share Posted October 6, 2022 I recently acquired a 1966 Skylark convertible. 401 dual quad 4 speed. According to the block and intake manifold numbers it appears to be an authentic 401 Dual Quad but I am not sure if Buick put these motors in Skylarks? Block also has "M 80" and "GM 705". Is there a way to confirm original motor to this Skylark or a motor swap? VIN verifies V8 GS. Thanks! 1 Link to comment Share on other sites More sharing options...
Craig Janakos Posted October 6, 2022 Author Share Posted October 6, 2022 Hi Mark, Thank you for your reply and for the heads up on the 65GS website. Link to comment Share on other sites More sharing options...
JCHansen1 Posted October 6, 2022 Share Posted October 6, 2022 Probably not without a Protecto-plate. Link to comment Share on other sites More sharing options...
Pfeil Posted October 6, 2022 Share Posted October 6, 2022 Buick Skylark GS Convertible Super Turbine (aut. 2) , model year 1966, version for North America U.S. (up to September) 1966 Buick Skylark GS Convertible Super Turbine (aut. 2) specs manufactured by Buick in United States 2-door convertible body type RWD (rear-wheel drive), automatic 2-speed gearbox gasoline (petrol) engine with displacement: 6572 cm3 / 401 cui, advertised power: 242.5 kW / 325 hp / 330 PS ( SAE gross ), torque: 603 Nm / 445 lb-ft, more data: 1966 Buick Skylark GS Convertible Super Turbine (aut. 2) Horsepower/Torque Curve characteristic dimensions: outside length: 5182 mm / 204 in, width: 1905 mm / 75 in, wheelbase: 2921 mm / 115 in reference weights: shipping weight 1607 kg / 3542 lbs base curb weight: 1680 kg / 3704 lbs how fast is this car ? top speed: 199 km/h (124 mph) (©theoretical); accelerations: 0- 60 mph 7.3© s; 0- 100 km/h 7.7© s (simulation ©automobile-catalog.com); 1/4 mile drag time (402 m) 16© s (simulation ©automobile-catalog.com) 1966 Buick Skylark GS Convertible Super Turbine (aut. 2) Detailed Performance Review fuel consumption and mileage: average estimated by a-c©: 23.1 l/100km / 12.2 mpg (imp.) / 10.2 mpg (U.S.) / 4.3 km/l, more data: 1966 Buick Skylark GS Convertible Super Turbine (aut. 2) Specifications Review Performance option below, my guess it's NOT a 2X4 carbureted engine. Buick Skylark GS Convertible Power Pack Super Turbine (aut. 2) , model year 1966, version for North America U.S. (up to September) 1966 Buick Skylark GS Convertible Power Pack Super Turbine (aut. 2) specs manufactured by Buick in United States 2-door convertible body type RWD (rear-wheel drive), automatic 2-speed gearbox gasoline (petrol) engine with displacement: 6572 cm3 / 401 cui, advertised power: 253.5 kW / 340 hp / 345 PS ( SAE gross ), torque: 603 Nm / 445 lb-ft, more data: 1966 Buick Skylark GS Convertible Power Pack Super Turbine (aut. 2) Horsepower/Torque Curve characteristic dimensions: outside length: 5182 mm / 204 in, width: 1905 mm / 75 in, wheelbase: 2921 mm / 115 in reference weights: shipping weight 1607 kg / 3542 lbs base curb weight: 1680 kg / 3704 lbs how fast is this car ? top speed: 204 km/h (127 mph) (©theoretical); accelerations: 0- 60 mph 7.4© s; 0- 100 km/h 7.7© s (simulation ©automobile-catalog.com); 1/4 mile drag time (402 m) 15.9© s (simulation ©automobile-catalog.com) 1966 Buick Skylark GS Convertible Power Pack Super Turbine (aut. 2) Detailed Performance Review fuel consumption and mileage: average estimated by a-c©: 23.4 l/100km / 12.1 mpg (imp.) / 10.1 mpg (U.S.) / 4.3 km/l, more data: 1966 Buick Skylark GS Convertible Power Pack Super Turbine (aut. 2) owertrain Engine manufacturer: GM Buick Nailhead V-8 401 (Wildcat) Engine type: spark-ignition 4-stroke Fuel type: gasoline (petrol) Fuel system: carburetor Charge system: naturally aspirated Valves per cylinder: 2 Valves timing: Additional features: Emission control: Emission standard: Cylinders alignment: V 8 Displacement: 6572 cm3 / 401 cui Bore: 106.36 mm / 4.1875 in Stroke: 92.46 mm / 3.64 in Compression ratio: 10.25 : 1 Horsepower net: Torque net: Horsepower gross: 253.5 kW / 345 PS / 340 hp (SAE gross) / 4600 Torque gross: 603 Nm / 445 ft-lb / 3200 Redline rpm: Car power to weight ratio net: 113 watt/kg / 51 watt/lb (estimated by a-c) Car power to weight ratio gross: 151 watt/kg / 68 watt/lb Car weight to power ratio net: 8.8 kg/kW / 6.5 kg/PS / 14.5 lbs/hp (estimated by a-c) Car weight to power ratio gross: 6.6 kg/kW / 4.9 kg/PS / 10.9 lbs/hp Fuel capacity: 76 liter / 20.1 U.S. gal / 16.7 imp. gal Engine lubricant oil capacity: 3.8 liter / 4 U.S. qt / 3.3 imp. qt plus 0.9 liter / 1 qt for filter change Engine coolant capacity: 17.5 liter / 18.5 U.S. qt / 15.4 imp. qt Battery capacity (Ah): 70 Link to comment Share on other sites More sharing options...
Pfeil Posted October 6, 2022 Share Posted October 6, 2022 (edited) The reason I say the above doesn't have 2X4 is if you look at the full size Wildcat option G/S below where it actually says 2X4's and the HP is 360 instead of 340 and a 400" , the engine below is a 425 nailhead and is only used on the big cars. Buick Wildcat GS Sport Coupe Power Pack (aut. 3 speed) as offered for the year 1966 since October 1965 in North America U.S. How many were produced ? Check Buick Full-Size 6gen available production numbers data. Production/sales period of cars with this particular specs: October 1965 - September 1966 Modelyears: 1966 Country of origin: USA United States /FLAG/USA.jpg Make: Buick Model: Full-Size 6th generation (Electra, Le Sabre, Wildcat) 1965-1970 Submodel: Wildcat 2-Door Hardtop 1965-1970 Optional equipment: EEC segmentation: F (luxury cars) Subsegment: S-C-L (luxury coupes) Class: full-size luxury / luxury car Body style: hatchback coupe Doors: 2 Traction: RWD (rear-wheel drive) Engine specifications Engine manufacturer: GM Buick Nailhead V-8 425 Engine type: spark-ignition 4-stroke Fuel type: gasoline (petrol) Fuel system: 2 carburetors Charge system: naturally aspirated Valves per cylinder: 2 Valves timing: Additional features: 4-barrel Emission control: Emission standard: Cylinders alignment: V 8 Displacement: 6970 cm3 / 425.3 cui What power? Horsepower net: Torque net: Horsepower gross: 268.5 kW / 365 PS / 360 hp (SAE gross) / 4400 Torque gross: 631 Nm / 465 ft-lb / 2800 Car power to weight ratio net: 103 watt/kg / 47 watt/lb (estimated by a-c) Car power to weight ratio gross: 138 watt/kg / 62 watt/lb Car weight to power ratio net: 9.7 kg/kW / 7.1 kg/PS / 15.9 lbs/hp (estimated by a-c) Car weight to power ratio gross: 7.3 kg/kW / 5.3 kg/PS / 11.9 lbs/hp Full engine data: horsepower/torque rpm, etc. - click the button below: Edited October 6, 2022 by Pfeil (see edit history) Link to comment Share on other sites More sharing options...
Craig Janakos Posted October 6, 2022 Author Share Posted October 6, 2022 Your replies and shared information is much appreciated! Link to comment Share on other sites More sharing options...
George Smolinski Posted October 6, 2022 Share Posted October 6, 2022 The only Buick engine I’m aware of from the 60’s that had 2 4’s was the Riviera engines and I think that engine was optional. Don’t have my “Standard Catalog of American Cars” with me, so I’m just guessing more or less. The 401 with the 2 4’s would make it a go fast machine. 1 Link to comment Share on other sites More sharing options...
Pfeil Posted October 7, 2022 Share Posted October 7, 2022 17 hours ago, George Smolinski said: The only Buick engine I’m aware of from the 60’s that had 2 4’s was the Riviera engines and I think that engine was optional. Don’t have my “Standard Catalog of American Cars” with me, so I’m just guessing more or less. The 401 with the 2 4’s would make it a go fast machine. Did you happen to see the specs on the Wildcat I provided. notice how many carburetors??? Buick Wildcat GS Sport Coupe Power Pack (aut. 3 speed) as offered for the year 1966 since October 1965 in North America U.S. How many were produced ? Check Buick Full-Size 6gen available production numbers data. Production/sales period of cars with this particular specs: October 1965 - September 1966 Modelyears: 1966 Country of origin: USA United States /FLAG/USA.jpg Make: Buick Model: Full-Size 6th generation (Electra, Le Sabre, Wildcat) 1965-1970 Submodel: Wildcat 2-Door Hardtop 1965-1970 Optional equipment: EEC segmentation: F (luxury cars) Subsegment: S-C-L (luxury coupes) Class: full-size luxury / luxury car Body style: hatchback coupe Doors: 2 Traction: RWD (rear-wheel drive) Engine specifications Engine manufacturer: GM Buick Nailhead V-8 425 Engine type: spark-ignition 4-stroke Fuel type: gasoline (petrol) Fuel system: 2 carburetors Charge system: naturally aspirated Valves per cylinder: 2 Valves timing: Additional features: 4-barrel Emission control: Emission standard: Cylinders alignment: V 8 Displacement: 6970 cm3 / 425.3 cui What power? Horsepower net: Torque net: Horsepower gross: 268.5 kW / 365 PS / 360 hp (SAE gross) / 4400 Torque gross: 631 Nm / 465 ft-lb / 2800 Car power to weight ratio net: 103 watt/kg / 47 watt/lb (estimated by a-c) Car power to weight ratio gross: 138 watt/kg / 62 watt/lb Car weight to power ratio net: 9.7 kg/kW / 7.1 kg/PS / 15.9 lbs/hp (estimated by a-c) Car weight to power ratio gross: 7.3 kg/kW / 5.3 kg/PS / 11.9 lbs/hp Link to comment Share on other sites More sharing options...
Craig Janakos Posted October 7, 2022 Author Share Posted October 7, 2022 I checked the block # with the VIN and it is a match. So I guess it's the original 401. I recently read that the factory sent out kits to dealerships to convert the Skylark to dual quads, but very few dealers did the conversion. Also read that Buick made 31 factory Skylark 401 2x4 near the end of production just to get them out there? I also read that there were many aftermarket conversions? Either way, the car car produces a big smile when driving. Thank you again for your replies. 1 Link to comment Share on other sites More sharing options...
George Smolinski Posted October 7, 2022 Share Posted October 7, 2022 2 hours ago, Pfeil said: Did you happen to see the specs on the Wildcat I provided. notice how many carburetors??? No, I missed it. The bs metric system jumbled in with the REAL specs must have thrown me off. Link to comment Share on other sites More sharing options...
Pfeil Posted October 7, 2022 Share Posted October 7, 2022 3 hours ago, Craig Janakos said: I checked the block # with the VIN and it is a match. So I guess it's the original 401. I recently read that the factory sent out kits to dealerships to convert the Skylark to dual quads, but very few dealers did the conversion. Also read that Buick made 31 factory Skylark 401 2x4 near the end of production just to get them out there? I also read that there were many aftermarket conversions? Either way, the car car produces a big smile when driving. Thank you again for your replies. It's possible, but improbable that Buick was just getting the 2X4 off the shelf because of the new edict coming down from the 14th floor of GM for the new 1967 GM cars. The edict said NO multiple carburetion for 1967. The new president of GM (ED Cole) in 1967 would be the father of the small block Chevrolet, the Corvair, the Vega who pushed the edict through. This new edict would exclude Cole's beloved Corvette and Corvair and would axe Pontiac's Tri-Power, Oldsmobile resurrected for 1966 J-2 from an eight-year absence from 1958. Buick for 67 had made redundant the Buick nail head and a 2X4 system for the new Gen 2 Buick designed big and small block engines. Pontiac would increase displacement on all its V-8's. The 326 would become the 354 (350 in name) the 389 would become the 400 and the 421 would become the 428 (really a rounded up 427) and redesign the cylinder heads valve angle and port angles and to increase valve diameter size. All done to promote better breathing and keeping HP up from previous engines. Thank you, Ed Cole. Link to comment Share on other sites More sharing options...
Jim Skelly Posted October 8, 2022 Share Posted October 8, 2022 Adding the 2x4 intake manifold and carburetors was probably popularized as more of the original cars they came on were sent to junkyards. Link to comment Share on other sites More sharing options...
Craig Janakos Posted October 8, 2022 Author Share Posted October 8, 2022 Thanks again for all the feedback. Here is an image of the motor. 1 Link to comment Share on other sites More sharing options...
Craig Janakos Posted October 8, 2022 Author Share Posted October 8, 2022 ...and the car. 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now