mitchwhodge Posted February 11, 2022 Share Posted February 11, 2022 Does anyone know anything about the 'Startix' feature on a 1934 Studebaker Dictator ? when I start the car, it seems that the starter continues to try and engage once the car has started. I find it interesting to start the car all you do is turn the key to the right and the car starts, no start button and the is only a three point key, middle is off, left is for the lights only etc.. and to the right it stays in that location and the car starts. In this case it seems to be erratic at best, the starter seems to want to keep starting, even as the engine is running. Any input would be greatly appreciated, this is the first time this car has been started in 27 years, it has takin months to get to the point of actually starting the car, and now this issue. Link to comment Share on other sites More sharing options...
hddennis Posted February 11, 2022 Share Posted February 11, 2022 mitchwhodge, send me a private message. I've saved some old info found online I can send you. There are a lot of moving parts inside and since yours has sat idle for ages you will probably have to disassemble it and clean and free up the parts. Howard Dennis Link to comment Share on other sites More sharing options...
mitchwhodge Posted February 11, 2022 Author Share Posted February 11, 2022 Please send me any information, I am very interested in correcting this issue. Thank you very much for your help. mitchwhodge@yahoo.com Link to comment Share on other sites More sharing options...
mitchwhodge Posted February 11, 2022 Author Share Posted February 11, 2022 mitchwhodge@yahoo.com is my email, please all the information possible on this subject would be very helpful Thank you! Link to comment Share on other sites More sharing options...
mike brady Posted February 11, 2022 Share Posted February 11, 2022 The first thing to do is clean up the connections on the Startix and to the generator. 1 Link to comment Share on other sites More sharing options...
edinmass Posted February 11, 2022 Share Posted February 11, 2022 Be sure you battery is FULLY charged. 6.1 volts or better. Also, check generator output. 2 Link to comment Share on other sites More sharing options...
mitchwhodge Posted February 15, 2022 Author Share Posted February 15, 2022 What should the generator output be? Thanks Link to comment Share on other sites More sharing options...
edinmass Posted February 16, 2022 Share Posted February 16, 2022 (edited) Too many years have gone by, Google startix and you should find lots of information. Edited February 16, 2022 by edinmass (see edit history) Link to comment Share on other sites More sharing options...
Oldtech Posted February 17, 2022 Share Posted February 17, 2022 On 2/14/2022 at 8:48 PM, mitchwhodge said: What should the generator output be? Thanks Usually about 7.2 volts but if 3rd brush type will vary considerably. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now