odat Posted February 25, 2021 Share Posted February 25, 2021 I have rebuilt my Lipe pressure plate and had to make some new springs. Now putting it all back together I am not sure how to set the 6 bolts that hold it all together. Theses are the studs that go through the 6 fingers that the throw-out bearing presses on. there must be some type of procedure to get this adjustment correct. long winters here in Maine and it just gets us in Trouble!!! Link to comment Share on other sites More sharing options...
mikewest Posted February 26, 2021 Share Posted February 26, 2021 Do you want some pictures of one?? Link to comment Share on other sites More sharing options...
odat Posted February 26, 2021 Author Share Posted February 26, 2021 No but I need some measurements off one. I need the distance from the top to the fingers. Link to comment Share on other sites More sharing options...
franklin28 Posted February 26, 2021 Share Posted February 26, 2021 I think Dick has a Long clutch not the Brown-Lipe clutch. He is looking for information on how to set the height of the release levers. Link to comment Share on other sites More sharing options...
odat Posted February 26, 2021 Author Share Posted February 26, 2021 Attached are two pictures of what I have and need. I need the distance in the picture with the scale. It looks like somewhere around 3/4 to 7/8. but could be anything. I need the distance from the finger to the bottom of the crossbar. or the finger to the top surface. both are the same thing. Link to comment Share on other sites More sharing options...
hook Posted February 26, 2021 Share Posted February 26, 2021 (edited) Dick, That's the long clutch. I e-mailed you some info that deals with that dimension. (maybe not) Bill Edited February 26, 2021 by hook left out (see edit history) Link to comment Share on other sites More sharing options...
odat Posted February 27, 2021 Author Share Posted February 27, 2021 Thank you , the information was just what the Dr ordered! it look great but we will know when it is in operation. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now