pkhammer Posted February 13, 2021 Share Posted February 13, 2021 I have five door or trunk locks that I don't know what they fit. The tag on the far left says Dodge. The 3rd and 4th from the left say YALE. All have Yale keys. Link to comment Share on other sites More sharing options...
Hudsy Wudsy Posted February 18, 2021 Share Posted February 18, 2021 The second from the left looks a lot like Chrysler products. Link to comment Share on other sites More sharing options...
drwatson Posted February 19, 2021 Share Posted February 19, 2021 The one on the right in the 1st photo is likely late 1946 to 48 Chrysler Dodge DeSoto Plymouth L+R Door. Mopar p/n 1162380 Similar variations are (Chry) coupe + conv. and later Mopars, the common feature being the shape of the keyway cover. To confirm it's Mopar p/n 1162380, measure from stainless base bottom to tip of shaft = 4-5/8". If it's something else, post what is and I'll ID further. Link to comment Share on other sites More sharing options...
Mark Wetherbee Posted February 19, 2021 Share Posted February 19, 2021 The one on the far left is similar to several on cars in the 20’s so Dodge is a possibility, but with the key number starting with the letter “S” it could Studebaker... 1 Link to comment Share on other sites More sharing options...
pkhammer Posted February 20, 2021 Author Share Posted February 20, 2021 On 2/18/2021 at 11:46 PM, drwatson said: The one on the right in the 1st photo is likely late 1946 to 48 Chrysler Dodge DeSoto Plymouth L+R Door. Mopar p/n 1162380 Similar variations are (Chry) coupe + conv. and later Mopars, the common feature being the shape of the keyway cover. To confirm it's Mopar p/n 1162380, measure from stainless base bottom to tip of shaft = 4-5/8". If it's something else, post what is and I'll ID further. The measurement of the one on the far right is 4 1/8", not 4 5/8". Link to comment Share on other sites More sharing options...
drwatson Posted February 21, 2021 Share Posted February 21, 2021 Closest in my Briggs+Stratton book is 4-1/4". To be clear I'm showing measure. SS base bottom to shaft end. 4-1/4" is Univ. dr. lock 49-52 Mopars. I see a tag on your lock, is there a readable P/N on it? Link to comment Share on other sites More sharing options...
pkhammer Posted February 21, 2021 Author Share Posted February 21, 2021 No, all I can make out is "Dodge". I measured it again and it falls a bit short of 4 1/4". If I really measure carefully it might be 4 3/16". Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now