stakeside Posted January 10, 2021 Share Posted January 10, 2021 I will be removing my engine and replace with a new rebuild. It appears I can remove the engine and not disturb the rear engine support and hydraulic master cylinder. 1) remove transmission 2) remove clutch and flywheel 3) place engine hoist and support engine 4) remove bolts that attach engine to the bell housing per attached picture 5) remove front mount bolts Link to comment Share on other sites More sharing options...
Kenendcindyc Posted January 11, 2021 Share Posted January 11, 2021 That’s exactly how I did my 28 std six, so I don’t see why it won’t work for you also. Link to comment Share on other sites More sharing options...
stakeside Posted January 11, 2021 Author Share Posted January 11, 2021 Thanks for comment. Do not know if that was the way it was done in the day but I will not that rear crossmenber to damage my fenders. Link to comment Share on other sites More sharing options...
stakeside Posted February 1, 2021 Author Share Posted February 1, 2021 Got my engine out with a sling setup. . 4 Link to comment Share on other sites More sharing options...
Mattml430 Posted February 2, 2021 Share Posted February 2, 2021 Are you rebuilding that engine or do you have another one getting done. Link to comment Share on other sites More sharing options...
stakeside Posted February 2, 2021 Author Share Posted February 2, 2021 This is a engine that was given to me. It was out of a passenger can. It ran well but has a few miles on it. I am having my original engine rebuilt. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now