broker-len Posted April 4, 2020 Share Posted April 4, 2020 (edited) I have little badge on my step plates that ride on running boards it is in a bad location I seem to hit it with my shoes when getting in the car the little screw keeps coming off the uderside tried ruffing it up and used JP WELD came off IN PICTURE YOU CAN SEE SCREW ATTACHED TO THIN CIRCULAR METAL MAYBE AS BIG AS NICKLE ATTACH TO BACK OF BADGE any suggestions ? Edited April 5, 2020 by broker-len (see edit history) Link to comment Share on other sites More sharing options...
DavidMc Posted April 4, 2020 Share Posted April 4, 2020 This is good stuff : http://www.soudal.com.au/pdf/TRex-FastGrabTDS.pdf Link to comment Share on other sites More sharing options...
broker-len Posted April 5, 2020 Author Share Posted April 5, 2020 thanks for your response this looks like a construction adhesive the mounting screw is on a circular this piece of metal I gess I'm looking for something that will bond tighter than what I have tried and dry hard Link to comment Share on other sites More sharing options...
Bhigdog Posted April 5, 2020 Share Posted April 5, 2020 You need more surface area for the adhesive. Twer it me I would cut a piece of brass just a bit smaller than the badge, screw and solder a brass stud into the brass and epoxy the brass to the badge...........Bob Link to comment Share on other sites More sharing options...
Mark Shaw Posted April 5, 2020 Share Posted April 5, 2020 https://www.amazon.com/3M-08061-Plastic-Emblem-Adhesive/dp/B0002MID28 Careful, it will peel the paint before it comes off... Link to comment Share on other sites More sharing options...
broker-len Posted April 5, 2020 Author Share Posted April 5, 2020 thank you mark have you used this ,,,how do you compare it with JB WELD ? Link to comment Share on other sites More sharing options...
broker-len Posted April 6, 2020 Author Share Posted April 6, 2020 please look at picture the badge seems to be aluminum originally it was just the screw attached to the badge, I found the washer which is tin I ground the screw head flat now looking for best way to attach the screw to badge tried JB weld came off looking for help----THANKS Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now