ski.dive Posted September 12, 2019 Share Posted September 12, 2019 Will the ACDelco - 25530882 work in place of the GM #25533700 abs pressure switch on the Reatta? https://www.amazon.com/ACDelco-25530882-Original-Equipment-Pressure/dp/B0010GFRD8/ref=asc_df_B0010GFRD8/?tag=hyprod-20&linkCode=df0&hvadid=312632042117&hvpos=1o3&hvnetw=g&hvrand=17991594612596887329&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9012428&hvtargid=aud-801657747996:pla-491354267936&psc=1 Link to comment Share on other sites More sharing options...
DAVES89 Posted September 12, 2019 Share Posted September 12, 2019 I believe the pins are round on our cars and not the spade pins as shown. I went to E bay and keyed in the part number and they confirm it will not work. However if you swap out the connector plug and verify each pin placement is in the correct location to out system you could maybe make it work. Or you could buy the correct one here on the forum. I have extras. Link to comment Share on other sites More sharing options...
2seater Posted September 12, 2019 Share Posted September 12, 2019 Amazon says it won't work either. Our switch does indeed have pins in place of spades, although they are semi-square. Link to comment Share on other sites More sharing options...
padgett Posted September 13, 2019 Share Posted September 13, 2019 Another issue depends on what the original use was. The Powermaster (used on Grand Nationals and some trucks/RVs) only runs at about 770 psi. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now