automaschinewerks Posted July 30, 2019 Share Posted July 30, 2019 good morning everybody, I finally have my Erskine engine done, and up and running. I have a ton of pictures to post on here, when I have some spare time. what I was looking at is the pertronix electronic ignition conversion kits. there is a part number available for the small delco distributors, and I can order it in 6-volt, negative ground, so I don't have to change anything electrically. I use lots of these kits on old tractors, and some on newer cars (50s, 60s). because stronger spark means leaner mixture is possible, cleaner running, more accurate timing, it should be better all around. has anyone tried/is using the conversion, and what are the experiences? thanks - terry Link to comment Share on other sites More sharing options...
stvaughn Posted July 30, 2019 Share Posted July 30, 2019 I think you already know the answer to your question, do it. And please give me the Pertronix part number so I can put it on my REO. 1 Link to comment Share on other sites More sharing options...
automaschinewerks Posted July 30, 2019 Author Share Posted July 30, 2019 the catalog shows a different number for reo cars and trucks, trucks show 2162, same kit number as 6 cylinder chev. for negative 6 volt, I have to order 2162 N6. the catalog is on pertronix.com Link to comment Share on other sites More sharing options...
stvaughn Posted July 30, 2019 Share Posted July 30, 2019 Thanks Link to comment Share on other sites More sharing options...
Matt Harwood Posted July 30, 2019 Share Posted July 30, 2019 (edited) I'm not really a fan of electronic ignition conversions in 6V cars. I've had several and they were very sensitive to voltage levels. I suspect that it's simply the usual 12V unit that just happens to also work on 6V. However, if your voltage is low during cranking or your battery is soft or anything other than ideal conditions, it can have problems making a spark. For example, I doubt it would fire an engine with a near dead battery using a push start or a hand crank. Not that you'll be doing either thing, but I have had cars that have just enough juice in the battery to turn over once or twice, and with points ignition they will fire. The Pertronix unit will not fire in those situations even if the starter can turn it. If your battery is never a little low (or dead), then you may not ever have any problems. But if it drops below a certain voltage level, the electronic ignition won't fire anymore and you're stuck, even if the starter can turn the engine. For that reason, I won't use them in my personal cars and remove them from most 6V cars that come into the shop (I keep them only if the original parts are really hard to find). Hope this helps. Edited July 30, 2019 by Matt Harwood (see edit history) Link to comment Share on other sites More sharing options...
automaschinewerks Posted July 31, 2019 Author Share Posted July 31, 2019 Matt, thanks, that is very interesting and I understand electronics like very stable voltages, I don't know if even the off and on from the generator cutout is pushing the line. most people that use the electronic have converted to an alternator, which isn't happening on my cars. those are the type of answers I may not get when I phone pertronix's tech-line. I do prefer my points, for reliability, and roadside serviceability. not to mention originality. the only reason I wanted to try them was to see if I could lean my carburetor due to the stronger spark. its the type of thing where curiosity may kill the cat. Link to comment Share on other sites More sharing options...
1927Chevy Posted August 1, 2019 Share Posted August 1, 2019 I have owned a 5 cars from the 20's and would choose ole points and condenser for spark as well as vacuum tank for gas supply any time. have witnessed near disaster with electric fuel pump and always enjoyed jumping out of the car and crank starting in front of astonished people. Link to comment Share on other sites More sharing options...
Stude Light Posted August 5, 2019 Share Posted August 5, 2019 Points and condensers (and magneto) - still the system of choice for a brand new $50k aircraft engine 1 Link to comment Share on other sites More sharing options...
1927Chevy Posted August 6, 2019 Share Posted August 6, 2019 If I had lots of money I would get one of these open cockpit J3 Piper Cub and buy a flat piece of land in Wisconsin and do touch and go's all day. Might throw the dog in the back seat. Points and condensers there. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now