trini Posted August 16, 2017 Share Posted August 16, 2017 Hello Mates, I have a problem and I need a quick solution. On the 28 Dodge Senior gearbox. Which way does the clutch disc face the flywheel ? Both sides of the plate is stamped (front) This assembly has a ring plate between the release bearing and the disc, resembling a clock spring style and three groves that is mounted on three studs fixed on the flywheel. I installed the gearbox twice with the short end of the disc spline facing the flywheel but there is not much movement on the pedal. I cannot remember how much movement was on the pedal before I removed the gearbox. If I remember correctly there were plenty movement but I am subject to correction. Weevil have eaten the wood main frame and I am doing a complete ground up rebuild. At 81 years my memory sometimes plays tricks on me. Cheers and have a nice day. Harry in Toronto Canada. Link to comment Share on other sites More sharing options...
keiser31 Posted August 16, 2017 Share Posted August 16, 2017 (edited) If you look in the instruction book, there may be a cutaway view. More than likely, one side of the hub may be longer. Look for a drawing similar to this 1931 drawing.... Edited August 16, 2017 by keiser31 (see edit history) Link to comment Share on other sites More sharing options...
trini Posted August 16, 2017 Author Share Posted August 16, 2017 Thank you keiser 31. this clutch is totally manual, no hydraulics. The pedal moves freely on its shaft. Only the link is adjustable by removing the cotter pin and turning the yoke one way or another for pedal height. This pressure plate has 3 slots . at equal distances on the outer edge and 3 lugs (pins) on the recessed flywheel so the pressure plate has to fit on the logs and slide in and out freely . The clutch plate is fitted on a recessed flywheel, then the pressure plate, all in the recess. The pressure plate is held in place by 3 7/16 bolts via 3 tabs (all recessed in the flywheel. Even the gearbox bell housing is recess into the flywheel. The center of the clutch plate has a heavy spring shaped like a clock spring. According to the manual ,remove the inspection plate and turn something inside the plate bearing to adjust clutch for wear. Something like a Spicer 16 speed gear box and not the pedal rod. I never saw one like it in my life. The pedal link is only for pedal height. I tried twice, re and re with no luck I am going shortly and remove the gearbox again, take some pictures and see if I can upload them on this forum. The clutch plate is new and was working fine before. I am going remove the gearbox shortly . Link to comment Share on other sites More sharing options...
keiser31 Posted August 16, 2017 Share Posted August 16, 2017 The '31 has a mechanical clutch, too. The reservoir you are seeing in the drawing is the master cylinder for the brakes. Link to comment Share on other sites More sharing options...
trini Posted August 16, 2017 Author Share Posted August 16, 2017 Hello keiser31, I re and re this gearbox 5 times . My neighbor who is a current army mechanic helped me twice . No luck. Pedal will not depress. I took pictures and I am trying to upload them. Cheers. Link to comment Share on other sites More sharing options...
keiser31 Posted August 17, 2017 Share Posted August 17, 2017 14 minutes ago, trini said: Hello keiser31, I re and re this gearbox 5 times . My neighbor who is a current army mechanic helped me twice . No luck. Pedal will not depress. I took pictures and I am trying to upload them. Cheers. Send them to me and I will post them here if you like. keiser 31 @ charter .net (no spaces) Link to comment Share on other sites More sharing options...
keiser31 Posted August 18, 2017 Share Posted August 18, 2017 Photos.... Link to comment Share on other sites More sharing options...
maok Posted August 18, 2017 Share Posted August 18, 2017 If its more like the 28 Chrysler clutch, here is diagram. As Keiser said, there is definitely a certain orientation to the clutch disc, long side towards the flywheel.User Manual page 46.tif I was deceived by the brake master cylinder on this page. Nothing to do with the clutch pedal. Link to comment Share on other sites More sharing options...
maok Posted August 18, 2017 Share Posted August 18, 2017 Here is a pic of the long side, with the rubber insulators. And the other side. Link to comment Share on other sites More sharing options...
maok Posted August 18, 2017 Share Posted August 18, 2017 Actually, looking at the diagram in-depth zoomed in, it appears that the rubber isolator side is towards the pressure plate, and no discernible difference in length of the hub of either side of the friction plates. But the actually item definitely look like there was a difference. Link to comment Share on other sites More sharing options...
keiser31 Posted August 18, 2017 Share Posted August 18, 2017 More photos.... Link to comment Share on other sites More sharing options...
trini Posted August 18, 2017 Author Share Posted August 18, 2017 Thank you keiser31. You are a true patriot. The last picture of the flywheel shows how it is recessed to accommodate the clutch assembly. I tried to show the dowels fixed inside the flywheel. One of the pictures shows the plate behind the disc, that floats on the dowels. It also has the 3 (fingers) levers which is pushed by the release bearing . The pressure plate assembly is loaded with a strange type (wound like a clock spring spring) yet of compression type . The manual warns not to fool around with that spring as it is loaded at the factory. If you notice the back of the pressure plate in the picture I installed the bolts in the incorrect spots. The bolts must be installed directly at the points of the tips " 3 pointed star". Notice in my installation the bolts are to the right of the pointed "star" which is incorrect. Even the gearbox bell housing is fitted into a machined grove. NO SLOP. I am amazed how efficient and advanced the Dodge Brothers technology was for the times. Every part is machined at very close tolerances. No room for the mechanic to make mistakes . Cheers. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now