Hubert_25-25 Posted September 22, 2016 Share Posted September 22, 2016 Looking for the following small parts. Headlight cover spring - missing 3 Brake adjuster bolt (3/8 x 1 1/2) - missing 1 Brake band adjuster nut (3/8-24 Heavy Hex) - missing 1 The headlight spring was used on all 1924 & 1925 models, and the brake parts on the 1924 4 cylinder and 1925 standard models. Thank you, Hugh Link to comment Share on other sites More sharing options...
dibarlaw Posted September 22, 2016 Share Posted September 22, 2016 Hugh: I told you that I have had to make each of these. So if you need some I can make them for you. I should have some of the headlight bezel clips as I did make extra. Larry Link to comment Share on other sites More sharing options...
Hubert_25-25 Posted September 23, 2016 Author Share Posted September 23, 2016 Larry, Thank you for the offer. I order hex stock from Online Metals, so I am good on the nut, unless someone has an original. I have a Master adjuster bolt that I can shorten and thread a little further. I just wondered if anyone had a Standard adjuster bolt laying around so that I would not have to modify the Master one. I will take you up on the headlight clips. Feel free to just send the spring steel. I just did not have a source for this. Hugh Link to comment Share on other sites More sharing options...
Mark Shaw Posted September 24, 2016 Share Posted September 24, 2016 (edited) Hugh, You're a bit too quick to make your own. I will check my inventory and advise. Sorry, none to be found.... Should be easy enough to modify a standard nut or just make one from hex stock. Edited September 26, 2016 by Mark Shaw (see edit history) 1 Link to comment Share on other sites More sharing options...
Kars35 Posted October 20, 2016 Share Posted October 20, 2016 I am looking for 2 4 cyl. Heads. Know of any? Thank you. Link to comment Share on other sites More sharing options...
Kars35 Posted October 20, 2016 Share Posted October 20, 2016 I am looking for 21 to 24 4 cyl heads. Anyone have any? Link to comment Share on other sites More sharing options...
Hubert_25-25 Posted October 20, 2016 Author Share Posted October 20, 2016 Larry fixed me up with the parts I needed, and I have hex stock at the house to make 1 nut. Mark and anyone else that was looking for these parts for me, Thank you for looking Hugh Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now