1924 or 1925 Buick brake and headlight parts

[Hubert_25-25]

Looking for the following small parts.

Headlight cover spring - missing 3

Brake adjuster bolt (3/8 x 1 1/2) - missing 1

Brake band adjuster nut (3/8-24 Heavy Hex) - missing 1

 

The headlight spring was used on all 1924 & 1925 models, and the brake parts on the 1924 4 cylinder and 1925 standard models.  Thank you,  Hugh

 

[dibarlaw]

Hugh:

 I told you that I have had to make each of these. So if you need some I can make them for you. I should have some of the headlight bezel clips as I did make extra.

 Larry

[Hubert_25-25]

Larry, 

      Thank you for the offer.  I order hex stock from Online Metals, so I am good on the nut, unless someone has an original.  I have a Master adjuster bolt that I can shorten and thread a little further.  I just wondered if anyone had a Standard adjuster bolt laying around so that I would not have to modify the Master one.  I will take you up on the headlight clips.  Feel free to just send the spring steel.  I just did not have a source for this.     Hugh 

[Mark Shaw]

Hugh,

     You're a bit too quick to make your own.  I will check my inventory and advise.

 

Sorry, none to be found....  Should be easy enough to modify a standard nut or just make one from hex stock.

Edited September 26, 2016 by Mark Shaw (see edit history)

[Kars35]

I am looking for 2 4 cyl. Heads. Know of any? Thank you. 

 

[Kars35]

I am looking for 21 to 24 4 cyl heads. Anyone have any? 

[Hubert_25-25]

Larry fixed me up with the parts I needed, and I have hex stock at the house to make 1 nut.  Mark and anyone else that was looking for these parts for me, Thank you for looking   Hugh