Douglas G. Brown Posted August 18, 2016 Share Posted August 18, 2016 (edited) This grille guard is 34 3/8 inches wide by 14 1/2 inches high. Note the red paint on vertical supports, which is in a groove. Curve on back of supports fit a bumper which is at least 5 1/4 inch high. Is this 1937 - 1938 -1939 senior Packard, on maybe the same years for Nash, Dodge or Chrysler? Would it be Original equipment, dealer installed accessory, or aftermarket? Edited August 22, 2016 by Douglas G. Brown have tried about 15 times to get picture to upload. (see edit history) Link to comment Share on other sites More sharing options...
keiser31 Posted August 18, 2016 Share Posted August 18, 2016 (edited) Photo? Usually if a Chrysler part has red striping, it is somewhere around 1940-48. Edited August 18, 2016 by keiser31 (see edit history) Link to comment Share on other sites More sharing options...
Douglas G. Brown Posted August 22, 2016 Author Share Posted August 22, 2016 On 8/17/2016 at 9:20 PM, Douglas G. Brown said: This grille guard is 34 3/8 inches wide by 14 1/2 inches high. Not red paint on vertical supports, which is in a groove. Curve on back of supports fit a bumper which is at least 5 1/4 inch high. Is this 1937 Dodge or Chrysler? Original equipment, dealer installed, or aftermarket? Thanks for checking in. I finally have been able to get my pictures to upload. I had to reduce their size. Link to comment Share on other sites More sharing options...
Douglas G. Brown Posted August 22, 2016 Author Share Posted August 22, 2016 On 8/17/2016 at 10:11 PM, keiser31 said: Photo? Usually if a Chrysler part has red striping, it is somewhere around 1940-48. Thanks for checking in keiser 31. I finally have been able to get my pictures to upload. I had to reduce their size. Link to comment Share on other sites More sharing options...
JACK M Posted August 22, 2016 Share Posted August 22, 2016 I thought to myself OH !! OH !! I FINALLY RECOGNIZE SOMETHING !!!!!!! Link to comment Share on other sites More sharing options...
keiser31 Posted August 22, 2016 Share Posted August 22, 2016 The guards look a lot like 1937 Dodge, but the unit is probably an aftermarket item. Link to comment Share on other sites More sharing options...
roysboystoys Posted August 23, 2016 Share Posted August 23, 2016 I've had several sets of those. They are aftermarket and designed to fit various width bumpers. You could use them single , in pairs or three together. Cross bars were optional. Somewhere I have a sales folder for them , not handy now. I've seen them mostly on trucks, needs a large bumper to look right on a car. They must have sold a lot in this area , I've seen many , but passed on them because of condition. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now