DHDorholt Posted April 29, 2015 Share Posted April 29, 2015 Looking for information on setting up a Stromberg glass bowl B #3.can't seem to find anything in any of my books.Anybody have any literature on this carburetor? Link to comment Share on other sites More sharing options...
Friartuck Posted April 29, 2015 Share Posted April 29, 2015 http://old-carburetors.com/Has some literature on Strombergs. Link to comment Share on other sites More sharing options...
carbking Posted April 29, 2015 Share Posted April 29, 2015 Very little factory information survives. The high speed adjustment is the nut above the airvalve (up for rich, down for lean), and the low speed adjustment is the nut below the airvalve.As both adjustments work against springs which are now more than 100 years old, and probably fatigued, the adjustments may not function as well as when new. To my knowledge, no one has reproduced the springs.Jon. Link to comment Share on other sites More sharing options...
Layden B Posted April 29, 2015 Share Posted April 29, 2015 Link to comment Share on other sites More sharing options...
DHDorholt Posted May 1, 2015 Author Share Posted May 1, 2015 Thanks Guys,This will get me headed in the right direction.It appears some one in the past replaced the drain cock with an adjustable needle valve to adjust the nozzle size. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now