Paul Falabella Posted May 2, 2014 Share Posted May 2, 2014 (edited) I labeled these two items "Hsng Brkt to Bolt", in an attempt to confuse myself, which worked.They are about an inch square, lightly plated, one screw in one of two holes.Anyone?Thanks Edited May 3, 2014 by Paul Falabella (see edit history) Link to comment Share on other sites More sharing options...
TexasJohn55 Posted May 2, 2014 Share Posted May 2, 2014 Paul, I don't recognize them right off. What have you got off the car now or have had recently, that might tell us where to start,. Please resize your photos before posting, down to about 60-100kb would be nice. On dial-up, my machine downloads pics at appx 1.6 kb/sec and your pic took me 9 minutes to load. I almost lost interest waiting. Link to comment Share on other sites More sharing options...
Paul Falabella Posted May 2, 2014 Author Share Posted May 2, 2014 Pretty sure it came off the front. Bumper(complete), grill, mustache and headlamp doors.Rear of car was off too, but all accounted for. Link to comment Share on other sites More sharing options...
old-tank Posted May 3, 2014 Share Posted May 3, 2014 Paul,That is properly called a "skip-a-part". Most of us install them on the second shelf or drawer under the workbench...they usually have plenty of company.Willie Link to comment Share on other sites More sharing options...
buick5563 Posted May 3, 2014 Share Posted May 3, 2014 ^^^^That's funny.With slotted screws, would it be some sort of license plate (non-Buick) piece? I don't recognize them. Maybe I need to check under my workbench. Link to comment Share on other sites More sharing options...
Paul Falabella Posted May 3, 2014 Author Share Posted May 3, 2014 LOL.I tend to agree with Willie. Though with weight problem I had with registering this car, the registration may now be incorrect.I did manage to squeeze those bumper jack hoist point paper weights in the back bumper. Could'a tossed those too. Link to comment Share on other sites More sharing options...
buick5563 Posted May 3, 2014 Share Posted May 3, 2014 If you don't have those jacking point things and you ever have to actually use your original jack, you will shred the bumper. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now