Wowabunga Posted June 11, 2013 Share Posted June 11, 2013 These style jacks showed up in the late 1930's. I have no reference to what it might fit... have seen similar jacks for the 39 Hudson, and the 35-36 Chevy that were nearly the same. Link to comment Share on other sites More sharing options...
Wowabunga Posted August 29, 2013 Author Share Posted August 29, 2013 Bumpity..... Link to comment Share on other sites More sharing options...
Larry Schramm Posted August 30, 2013 Share Posted August 30, 2013 Bumper jacks as I have only heard them called have been around a long time in one form or another. Your example with a screw adjustment is just one style of the same theme. These jacks were used well into the 1970's depending on the vehicle. Newer versions have a latch mechanism. Here is a picture of a newer style that I believe goes to a late 60's or early 70's GM car. Link to comment Share on other sites More sharing options...
michaelod Posted August 30, 2013 Share Posted August 30, 2013 These bumper jacks were dangerous and prone to falling. On occasion we used to take advantage of that fact when trying to extricate a car that was stuck in the snow/mud. By jacking up the car to its full extension and pushing the car (without much effort) off the jack, it would move laterally into a new position and then possibly be free. Link to comment Share on other sites More sharing options...
ply33 Posted August 30, 2013 Share Posted August 30, 2013 That screw type bumper jack doesn't look more dangerous than the later ratcheting type. Not that I'd trust either.michaelod mentioned on reasonable use for them. Another one is to break the bead on a tire, just place the wheel and tire assembly on the ground under the bumper, put the jack on it and attempt to jack up the car. Generally the bead will pop before the car gets too high. Link to comment Share on other sites More sharing options...
john2dameron Posted September 3, 2013 Share Posted September 3, 2013 That screw type bumper jack doesn't look more dangerous than the later ratcheting type. Not that I'd trust either.michaelod mentioned on reasonable use for them. Another one is to break the bead on a tire, just place the wheel and tire assembly on the ground under the bumper, put the jack on it and attempt to jack up the car. Generally the bead will pop before the car gets too high.I broke many a bead loose in the '50's and '60's using a bumper jack. It was a simple and quick acting remedy to a sticky problem. Link to comment Share on other sites More sharing options...
Bleach Posted September 3, 2013 Share Posted September 3, 2013 I'd trust any one of those more than what you can buy today. Link to comment Share on other sites More sharing options...
Wowabunga Posted September 19, 2014 Author Share Posted September 19, 2014 This jack is an AFTERMARKET.... recently found an advertisment with same jack. The small skinny handle is the same as the 39 Hudson, and the 35-36 Chevy. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now