George Albright Posted May 29, 2012 Share Posted May 29, 2012 Dear Friends. I have an early 1920s Equipto Line aftermarket Model T roadster body similar to the lower car shown. I want to build it with front and back cycle type fenders like the lower one shown. Thus need a full set of old or repro fenders that will fit a Model T frame. See photos attached. PS I would also like to find a pair of bolt on step plates like those shown in these illustrations.Leads appreciated! George Albright,Ocala,Fla. email: gnalbright@gmail.com cell 352 843 1624--10 AM to 4 PM EST. <!-- / message --><!-- attachments --> Link to comment Share on other sites More sharing options...
28 Chrysler Posted May 29, 2012 Share Posted May 29, 2012 Many times spare tire covers were cut in two and simple brackets attached them to the axle. Check Ebay or Hot Rod catalogs for them. Link to comment Share on other sites More sharing options...
Rusty_OToole Posted May 29, 2012 Share Posted May 29, 2012 Depending on the size of the wheels, bicycle or motorcycle fenders might be cut to fit. A vintage motorcycle parts vendor like Wolf Cycle should have something. Link to comment Share on other sites More sharing options...
George Albright Posted May 30, 2012 Author Share Posted May 30, 2012 THANK YOU both for your helpful replies! George Link to comment Share on other sites More sharing options...
trimacar Posted May 30, 2012 Share Posted May 30, 2012 This shows a way to make them, posted it on your other request.... Speedster Fenders Link to comment Share on other sites More sharing options...
George Albright Posted May 30, 2012 Author Share Posted May 30, 2012 Again MANY thanks to the poster! This will really help alot of us!! George Link to comment Share on other sites More sharing options...
Rusty_OToole Posted May 31, 2012 Share Posted May 31, 2012 If you wanted to get ambitious and form your own fenders.. they were made by rolling a strip of sheet metal between rollers less than a foot in diameter. It might be possible to turn a set of rollers out of hardwood, on a wood lathe, for a limited use. It is hard to describe but have seen pictures of old factory scenes. Maybe a web search will turn up something Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now