Reattatude Posted April 18, 2009 Share Posted April 18, 2009 the cassette/CD holder doesnt want to come loose. Manual isnt much help. I need to take out the console storage unit to loosen the trim and remove the front storage (cubby box) I dont want to damage the CD holder, so anybody have suggestions, I thought its supposed to just snap out? Link to comment Share on other sites More sharing options...
Guest Bobby Valines Posted April 18, 2009 Share Posted April 18, 2009 What year is it, looks like maybe a 91 from the rims? Link to comment Share on other sites More sharing options...
Guest CL_Reatta Posted April 18, 2009 Share Posted April 18, 2009 use a small flat head scredriver to pry it, it has 4 clips that hold it down... I attached the pics from my center console removal thread. Link to comment Share on other sites More sharing options...
padgett Posted April 18, 2009 Share Posted April 18, 2009 Storage in a 90/91 armrest compartment is in two pieces, the cassette or cassette/cd holder (depending on the option) and the main shell. Both just pull out.Depending on what has gotten spilled, they may be stuck together. Use a steady force to seperate but do not play Godzilla. Link to comment Share on other sites More sharing options...
padgett Posted April 18, 2009 Share Posted April 18, 2009 Cleeps ? We don have no cleeps (may have been discarded by PO) Link to comment Share on other sites More sharing options...
Guest steveskyhawk Posted April 18, 2009 Share Posted April 18, 2009 Pepsi or Coke + cigarette ashes= superglue Link to comment Share on other sites More sharing options...
Guest Bobby Valines Posted April 18, 2009 Share Posted April 18, 2009 I didn't see the (SHOW ME) sorry. I have a 89 casette holder oops you can have Link to comment Share on other sites More sharing options...
handmedownreatta Posted April 18, 2009 Share Posted April 18, 2009 some 89s came with cd holders? Link to comment Share on other sites More sharing options...
padgett Posted April 18, 2009 Share Posted April 18, 2009 Same ones that had cup holders. Link to comment Share on other sites More sharing options...
89REATTAJIM Posted April 18, 2009 Share Posted April 18, 2009 <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: handmedownreatta</div><div class="ubbcode-body">some 89s came with cd holders? </div></div>I think it should read "Cassette" holder.. Jim Link to comment Share on other sites More sharing options...
Guest CL_Reatta Posted April 18, 2009 Share Posted April 18, 2009 hmmmm, half my post like disappeared when I said that the cassette holder just come out along with the pic????maybe i'm just imagining that I put it on the post? Link to comment Share on other sites More sharing options...
Reattatude Posted April 19, 2009 Author Share Posted April 19, 2009 The 1991 cars are same as 1990 consoles, clips holding in the CD holder, two screws for the back of the shifter console and clips on the black trim. You have to remove the black trim first and then the chrome trim. Disconnect the fog lamp switch, remove two screws for the chrome trim. Then you can access the two torx screws holding the cubby box storageHave I finished installing my burlwood Riviera trim?? NO. the storage box needs work, the chrome trim is not attached so the door doesnt work smoothly. Worse, the dash bezel came with one screw (oh boy a spare screw I thought) Yeah, it came with that screw b/c it is jammed and wont come out!! argh. I am going to try removing the vent part from the bezel and use a c-clamp to push the screw out - then I will find out if the mounting hole is any good at all - will probably have to find a small washer to make it work again. ; P Link to comment Share on other sites More sharing options...
Guest steveskyhawk Posted April 22, 2009 Share Posted April 22, 2009 ReattatudeDo not try to remove the screw in that IPC bezel. I have seen this situation where one screw doesn't back out many times. Simply feed that screw into the tinnerman and when you tighten it it will draw the bezel into it's exact final location. If you attempt that deal with the c-clamp you will break the bezel. Removing that screw is unnecessary. Keep it easy. Link to comment Share on other sites More sharing options...
Guest Squire Tom Posted July 26, 2011 Share Posted July 26, 2011 how does one remove the cigar lighter socket ? lost power to the unit and appears either socket is bad or electrics have come loose. fuse is ok and v meter does not register any voltage. need the hots for my garmin. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now