Ovalrace25

Any one have a rear bumper?? I think it is the same up to 29,,, with a small difference, but will do the job.. Any help out there? Thanks!

Trying to get the headlight doors working again. I can not read the wiring diagram very well, bad copy.. But I do know that the two relays are NOT the same... My parts guy is trying to tell me they ARE the same... But one is a four-wire and the other a three-wire... I have a new four-wire relay but can not seem to get the other.. Any ideas? Any part number for a Standard Ignition Product brand??

I need to re-cover the running boards on a 40 Commander. I have two contacts that are ready to do the boards... I am looking for the guy that MAY have them ready to send the rubber to me instead of me sending my metal backs to him.. Anyone know who can help? These boards have the "S" in the center, they are not plain like the 39 boards. NEXT step is.... How do I get the rubber OFF the steel? These things are REALY bonded!!!

Anyone familiar with the headlight door motor relays on a 65 Riviera? I do have a wiring diagram but it is a poor copy.. I think I have one bad relay. I can run the motor when I bypass the relays and doors open and close. The relays are NOT the same, I have had one dealer TRY to tell me they are both the same,,, I am NOT convinced of that.. I think the three-contact relay is bad... Tell me more!!! PLEASE......

Well, I posted a couple notes on the board, I see that some have looked at them. But I am kind of out of luck here.... I NEED some of you guys to give me some phone numbers or SOMETHING, so I can help get these two cars going again. The 27 is a model EW big six. I need a water pump, pump drive shaft and couplers. I also need a driveshaft coupler (rag joint) and a front tie rod end. I DON"T have the car here and can not look at the car and can not get the parts sent to me to repair. I also need a speedo cable and speedometer for the '27. PLEASE HELP ME!!! I do have the 1940 Commander here in my shop and need some trim for the car. I ALSO want to get the running boards restored... There MUST be someone out there that can help point me to the right person for the running boards??? Thanks Much!

Just doing some resto work on a 40 Stude. Need to know who can do the running boards,,,, correctly of course... Anyone got the trim piece for the rear left belt line? Yep the one that gets damaged by rear door swinging open too far. I will also need some good hub caps.

1927 Studebaker parts help needed. This car is a series 27 Commander and needs a water pump, pump drive couplings, Driveshaft coupling, speedometer cable and speedometer. Also need one tie-rod end. These items come from an unusual request in that the car is out of this country and the mechanics working on it have limited English language skills. They are unable to reproduce these parts and are also unable to do even minor alterations or machine work to fit replacement parts. What may be necessary to get the car operable again is to find a similar model here in the states and fit the replacement parts to that car then send them. Can anyone help me with this project? Thanks you in advance, Rod <img src="http://forums.aaca.org/images/graemlins/confused.gif" alt="" /> funcars4us@hotmail.com