![](http://content.invisioncic.com/r277599/set_resources_1/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
junkyardjeff
-
Posts
2,050 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by junkyardjeff
-
-
Coupe or convertible? Not sure yet.
-
-
-
-
The only broken part was the front axle,the rest just fell apart and now on to the four cylinder version.
-
2
-
-
-
-
-
-
39s had different rims and hub caps too.
-
When I build them with the 39 parts I refer them as 40 standards since it still has a 40 dash and windshield,those parts a different between those two years.
-
1
-
-
-
Could be a bad turn signal switch,the power from the brake light switch goes to the turn signal switch before going to the lights. Had that happen to a 65 Galaxie many years ago.
-
-
-
-
Nothing in the shop manual,there is a vacuum diagram for the heating and a/c but nothing for the washer.
-
Still trying to find a washer hose diagram and a picture of the correct washer for a 57.
-
Reassembling a 57 98 convertible and now just getting to hook up the washer so I need to know where the vacuum source is taken for the washer,not sure if it was originally a J2 but is now. Could not find anything in the shop manual and want to put it back to original as I can.
-
The part the hand crank fits in is the nut to hold the pulley on and the pulley looks to be keyed,now to get the pulley off without damaging it.
-
Bore is around 3 -13/32.
-
-
-
We have a 37 ish flathead six in the shop to see if it can be saved,is the crank pulley pressed on or does it screw on.
Why not another 34 Ford
in Scale Automobiles (Models)
Posted
This one is getting the stock rims from the 60s monogram 40 pickup kit for a early 50s hotrod look.