KQQLCAT

I still have the pipe and did not use it. You can have it. But no garantees that it will work. I looked at it and did not like what I saw so I did not try it.

My 61 Olds chassis shop manual shows all this. I wouldn't be without it. They are on ebay all the time.

Clock Works fixed it but only lasted 6 hours then it burnt up.

Try this place I got my 61 88 carpet here. ACC: your authority for custom automotive carpet, floor mats, and more

I am posting this here so I get all the car people. I have a 61 Olds Dynamic 88 2dr sedan that I would like to rebuild the rear suspension but I can't find anyone that sell the new bushings. It looks like a four link system. What are my options? Anyone? Thanks Pat

I am looking for a console. Pat

I sent the clock to Clock Works to be repaired. Thanks

Has anyone ever repaired their clock? My clock has a burnt solenoid coil and resistor. The rest of the clock works fine. I was wondering if the coil could be repaired by a TV repair shop or If anyone has a clock that is all pitted up but the coil is good for sale. I can send it out to Clock Works to get repaired but before I kick out $150 I thought I would check here first. Thanks Pat<!-- google_ad_section_end --><!-- / message --><!-- sig -->

Pretty sure that 1960 was the last year for the torque tube. My friend has a 61 LeSabre convertible and it does not have a torque tube.

How much for one? Thanks Pat

Who's going?

Okay I bought the NOS exhaust pipe that is used for dual exhaust and it can be done however it has so many bends and kinks in it that the restriction in flow is high. Pat

You will need a 64 Starfire left side manifold to make it work right. I have seen some people split the single exhaust right after the right manifold. Pat

First you have to find a 64 Starfire exhaust manifold for the drivers side. Not an easy task.

I am looking for a 61 62 Starfire Console. Buckets also Thank you, Pat

Year one , Classic Industries, Eckler's LateGreatChevy, all have them for the Chevy's Pat

This is the first time I have seen or heard of this show car. Really cool with those headlights. Pat

I have Hagerty and have had two claims and they paid out right away with no questions asked. Pat

I am looking for LH upper front bumper trim that goes next to turn signal light on a 1961 Full size olds. Part #581231 Thanks I FOUND IT THANKS Pat

I know I have seen them new ones on ebay Pat

Yes it fits perfectly. You have to jack the engine up quite a bit to get it in but it fit quite well. Pat

It won't work with 2 1/4" exhaust. I put the other manifold on and all is good now. Pat

I thought I would put a picture of Ross Racing Engines transmission. This is a TH400 and comes with flywheel and torque converter. Nice piece. I plan on this swap.

Try these places: Fusic 860-623-1583 www.fusick.com USA Parts 800-872-2013 www.usapartssupply.com

Where can I find a gas tank sending unit gasket for a 61 Olds 88? Thanks Pat