cquisuila

so the first picture was good

it is good at first the engine seems to be blocked but it is good the STEERING rusty belt was attached to the crankshaft pulley now the engine turns at the hand i have to start the engine now !!

it seems to be coming back normal

as it ?

normaly if you lower the hole of the rear hinge, the hood should lower, I think

yes try !

ok thank you all !!! I ordered windows Weatherstrip Inner and outer on https://www.rubbertherightway.com i hope it is good quality thank you for the name : ROOF RAIL Stripping

Hello I'm french and i'm looking for the name of this windows seal ? Is it Sash Channel Filler / Glass Setting Tape for example ? Please see the picture I found a pleasant web site : https://www.rubbertherightway.com/1966-buick-restoration-parts-windows-7337- ctg.htm#loadContent.filterValuesRequest,filter_id_55=55|57,filter_id_41=41|51,filter_id_61=61|168

super information !! great !!

CORRECT bolt as OPGI.COM But it is not notifing the diameter ???😬

OPGI.COM notify a fine thread FOR 1963-1966.

ok thanks i will see this point this adjustement is it correct ?? SEE PICTURE please

the belts are here it just missing the bolts on the front i have to find the good bolts??!! for my 1966 riviera

THE HINGS not include play perhaps the spring is rigid... at this moment it is not efficient here it does not line up and it is necessary to press on each side see picture please

iT seems that, on my car, the bolts have disappeared as the picture ? 🙃

ok i make it Where is it important to lubricate please (see picture) ? thanks !!!

hello I just changed the front hood hinge and spring pair But i need an adjustement because in rear the hood goes up 😔and i have to push on the left and right side to alignment thank you for your help ! Philip

where are the seats belts fasteners on my Buick riviera 1966 please ? I have the belts but they don’t connect to the chassis😁

ok merci BEAUCOUP ! thank you very much !!😁

yes i have this part Does it drop to the L and above immediatly when ignition is on or when engine started ? How can i test this sender unit without change ?* How can i test the jauge on odometer please ? (i think that my jauge is not efficient....) A lot of questions it is sure ....;)

thank you !!🙂 i bought this unit ! HOW CAN i test this unit without change ? AND how does the pointer on the odometer ? does it drop to the L and above immediatly when ignition is on or when engine is started ? i say it because i haven’t started my engine yet...

Hello Where is the oil pressure sender switch on my engine riviera 1966 (425) please ? thanks Philip

great !!!

ok super Tom ! I look for and if it is inexistant ...CAN I REMPLACE it with a normal wire ? And for the difference 4 pins and 5 pins ignition switch ? GROUND pin...