Jump to content

cquisuila

Members
  • Posts

    596
  • Joined

  • Last visited

Everything posted by cquisuila

  1. THE HINGS not include play perhaps the spring is rigid... at this moment it is not efficient here it does not line up and it is necessary to press on each side see picture please
  2. iT seems that, on my car, the bolts have disappeared as the picture ? 🙃
  3. ok i make it Where is it important to lubricate please (see picture) ? thanks !!!
  4. hello I just changed the front hood hinge and spring pair But i need an adjustement because in rear the hood goes up 😔and i have to push on the left and right side to alignment thank you for your help ! Philip
  5. where are the seats belts fasteners on my Buick riviera 1966 please ? I have the belts but they don’t connect to the chassis😁
  6. ok merci BEAUCOUP ! thank you very much !!😁
  7. yes i have this part Does it drop to the L and above immediatly when ignition is on or when engine started ? How can i test this sender unit without change ?* How can i test the jauge on odometer please ? (i think that my jauge is not efficient....) A lot of questions it is sure ....;)
  8. thank you !!🙂 i bought this unit ! HOW CAN i test this unit without change ? AND how does the pointer on the odometer ? does it drop to the L and above immediatly when ignition is on or when engine is started ? i say it because i haven’t started my engine yet...
  9. Hello Where is the oil pressure sender switch on my engine riviera 1966 (425) please ? thanks Philip
  10. cquisuila

    Keys

    ok super Tom ! I look for and if it is inexistant ...CAN I REMPLACE it with a normal wire ? And for the difference 4 pins and 5 pins ignition switch ? GROUND pin...
  11. cquisuila

    Keys

    Thanks Ed !🙂 i have the diagram but it is not all. The precedent owner in USA will not answer me. I hope that a another man will be able to help me with the wire in place in my car and he can explain to me the diagram of the ignition switch with especially this famous cross tracer wire on ignition pin (see the diagram picture) ???
  12. cquisuila

    Keys

    HELP !! emergency please🥵 on my ignition switch connector, the wire black connected with the pink heats and melts the plastic !!!🥵 this wire ...is connected with a cross tracer wire ??? THERE IS a loop in this wire !! Here the diagram of riviera 1966 with detail's ignition switch what's the problem please ??
  13. cquisuila

    Keys

    So in my switch the ground is made with the board panel or internal in the switch ? If i put a switch 5 pins I have to connect a ground wire to this 5th pin. no ??? HERE my connector switch :
  14. cquisuila

    Keys

    super !!! great for you !! i'm looking for !!
  15. cquisuila

    Keys

    hELLO I try to retry cylinder lock with the hole with attach letter but i can't . So i will be able to drill the lock cylinder to remplace it (it is damaged on my car). And if i can change the ignition switch i will make at the same repair. SO I have an ignition switch on my riviera 1966 with 4 pins (D-R, battery, ignition and access); But CAN I put an ignition switch with 5 pins ? The difference is on the ground pin. There is the pin ground on the ignition switch 5 pins. On my ignition switch (4 pins),it is written "ground" on the switch but no pin. Thanks Philip
  16. OK R43 S is good with short thread I BOUGHT in France DENSO W16 PRU equivalent of R44S or R43S Thank you !
  17. The length of filetage is different. The R43 has a very short thread compared to that currently R44 LTS put in the car it’s not serious ?? Can i put this new R43 ? I'm sorry to disturb you again.
  18. Thanks I will see this point . pHILIP
  19. Hello I want to CHANGE sparks on my car RIVIERA 1966 there are ON THE ENGINE SPARKS ACDELCO R44LTS AND I BOUGHT ACDELCO R43S But they are totally different !! see the picture please ! I don't understand can i put this ADELCO r43s
  20. my lights (tail light, cornering lights, severals lights on panel...) continue to on when the ignition is off i must disconnect battery my car hasn’t driven in a long time and i will be able to start the engine later... and I HAVE to resolve in first the cluster gauges thank you for your help and advise philip
  21. OK You are great ! thank you for this information !🙂
  22. OK Jason Thank you very much for your quick answer !!! Greats regards ! Philip
  23. i have the identification of my car RIVIERA 1966 on the attached picture and there are options but i don(t know what is this options : EXY 2KR (air conditioner ???) 4F (remote mirror ??) iF someone knows....COOL ! Edited 1 minute ago by cquisuila (see edit history)
×
×
  • Create New...