panelbeater1234

Looking for a solinoid for my starter motor Autolight starter ..John

still looking no replys as yet on the solinoid for a 1937 dodge starter motor .....John

still looking for a solinoid ..john

Still looking for the solinoid that has 4 bolts and fits on top of the starter motor.....John

it is a Autolight 6 volt

hi all looking for a solinoid for my starter motor the one with the relay and solinoid on top of the auto light starter it has a plunger that pulls in .Regards John

Could you tell me what a reasonable lb per square inch should be on the cylinders please .Regards John

i did realise after i sent it good boy your a good trump man it is a plymouth dodge gear box 1937 flat head 6 motor .can send photos

Looking for the speedo gear where the speedo cable goes into .only if some one has parted a old transmission box Some one may have one lying about .kind regards John

Looking for door key and lock for a 1937 door

Has hubcap set sold for 1937 dodge ...John

Looking for about 6 of these that on the tye rod ends and brake drums ......John

Hi almost finished my rebuilding 1937 Plymouth motor and would like to know where the deflector goes .I'm sure it bolts at the rear of the 23 inch motor to deflect the heat from the sterring box area your thoughts would be a help......Regards /John

yes it is tapered and I had to drill it and then tape it with the correct thread .Many thanks .....John

Would like to know what thread size for a tap to clean the thread on the flat head 6 cylinder on my dodge motor it is the plug that I wont to install aheater it is at the rear on top .it was seased and I had to drill out and want to clean the thread .....John

Come on chaps if you could send me the pattern of the hing on your 1937 Plymouth sedan glove box door hinge please .....Regards John

Would like some one to get in touch email me as I am after a pattern or if they have for sale a glove box hinge to complete my restoration 1937 Plymouth police car. Regards John

Would some on be able to give me a pattern of the hinge size on a 1937 d5 dodge sedan .if you could trace on paper and post to me would be great as I can make a new one .I will forward payment for postage .Regards John

Would like to obtain a pattern of the glovebox hing as I will manufacture a new one .....John

also another option if some one could give me the pattern I will manufacture a new one ....John

Would like to purchess a glove box hinge for a 1937 dodge D5 Sedan also the knob and surround that you open the glove box my email is gliderpilot@kinect.co.nz......John

Sorry I forgot its for my 1937 d5 dodge sedan....john

Hi could some on explane what type of seal or should I say pattern goes onto the opening of the front body part I have the rubber that goes onto the screen frame when it closes onto the body not sure what goes behind that .any help would be appreciated .kind regards John