plk
-
Posts
341 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Everything posted by plk
-
WANTED 2 #6 BUFFALO WIRE WHEELS 17" LOCKRING Contact Pete
-
What voltage?
-
No help at all; here are 3 pics of what I could use. Pete
-
PM sent Pete
-
WANTED oil pressure gauge for 1926 Stutz, black face.
-
BEAUTY!!!!!!!!!!! LIGHTS HAVE FOUND A HOME
-
Here are pics; nice shape,still has blk paint, slight surface rust. I plain lens and 1 fluted. Call me 519 396 3264
-
Hi Advicc I have a pair here; I'll post a couple pics. Pete Kelly
-
Morning Mike I looked but no luck; too much other "junk" Pete
-
No Guess again A clue Pete Kelly
-
WANTED OIL PRESSURE GAUGE Take a look at the pic. No glass or bezel on this gauge; all the gauges are behind 1 large glass. Sorry I don't have a better pic Pete
-
check out https://www.ebay.com/itm/1984-Other-Makes/143559116008?hash=item216cca44e8:g:gSQAAOSwvfxeY-LB
-
I looked at a '29 Packard cam and it looks very similar. Can 1 of the Packard guys give his opinion? Pete
-
WANTED RADIATOR TANKS ONLY for Stutz '29 up . Please PM if you can help Pete Kelly
-
Thanks Jack I got to thinking somebody into cam regrinding would have the best chance of an ID Pete
-
I looked at this cam and it has a long duration for an early strait 8. Could it be a hi-performance cam? But for what???
-
Just came across this today The body is '28 or '29 Auburn boattail speedster Pete
-
1934 Auburn
-
Thanks Guys I am still stymied as to what it is; what it isn't is helpful. Pete
-
I just measured this cam and it is 35" tip to tip. Pete Kelly
-
I looked for numbers but only a 0 beside 1 tooth of the gear to drive the dist/oil pump. The pic shows the end of the cam with the large brass bearing/bushing.
-
Can someone tell me what is belongs to?
-
ID wanted on this straight 8 camshaft. Please look at the pics. Pete
-
NEW INFORMATION FOR THE WANTED HUB PULLER 1924 PACKARD WITH DISC WHEELS Can anyone tell me the hub thread size and threads per inch?? Pete
-
I don't know so am asking here.
