cobalt Posted January 30, 2007 Share Posted January 30, 2007 Just got car home....motor/trans I need help..the motor mounts are gone and the frame brackets are totally different than cutlass....there must be another bracket that goes there or else really different pads....I have the factory service manaul but it does NOT show even a picture of the mounts,,,,,,can anyone tell me where i can get at least a picture of what I am looking for?...thanx <img src="http://forums.aaca.org/images/graemlins/confused.gif" alt="" /> Link to comment Share on other sites More sharing options...
junkyardjeff Posted February 4, 2007 Share Posted February 4, 2007 Steele rubber product has what you need,you might need to to send in your mounts as some have new rubber molded to your original steel cores,I have a 97 catalog and their number then was 1-800-544-8665 they had mounts listed for 61 to 63s but this is a 10 year old catalog and many items could have been added since Link to comment Share on other sites More sharing options...
cobalt Posted February 8, 2007 Author Share Posted February 8, 2007 thanx..I'll try them...part of the problem is I do't have the old ones to redo Link to comment Share on other sites More sharing options...
rocketraider Posted February 9, 2007 Share Posted February 9, 2007 I've seen them on ebay a few times. This is a one-year only application so Steele may not be making them, though they could easily rebuild the originals if you had them. I don't have my parts books handy and the computer at home is dead so it'll be Monday before I can give you part #s.This same question came up on www.realoldspower.com a while back and someone posted a pic of the frame mounts. Can't remember if a pic of the actual rubber mount showed up.I've often wondered why the 64 books don't show the J-88 330 engine mounting. Link to comment Share on other sites More sharing options...
joe_padavano Posted February 12, 2007 Share Posted February 12, 2007 Just to close this thread out, I took a look at my J88 that's currently parked out by the shed, several projects down in the queue. The frame mounts are two tabs that extend rearward from the crossmember. The rubber motor mounts look amazingly like the 65-70 full size mounts. These are the ones that have a single threaded stud sticking out from the frame side of the rubber mount. The J88 mounts sit directly on the two tabs on the frame and the studs extend through the holes. They are retained with an oversize washer and nut. I don't know if the 65-70 mounts are identical, but I bet they would work. Link to comment Share on other sites More sharing options...
Guest Posted March 20, 2007 Share Posted March 20, 2007 GM Group# 0.027 shows Part# 384059 for J88 FRONT Engine Mounts.They are different than the other Full Size Olds because of the 330 Engine.REAR RH (trans mount) is 586540 & LH is 586541 which is also used on 1961-63 Full Size Olds with AUTO TransPer Motors, Chilton, Mitchell Manuals & Olds Parts Book Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now