Old26Buick Posted November 3, 2006 Share Posted November 3, 2006 I havea 26 Buick Standard and am going to put a 27 Standard crankshaft in the 26 engine. The 27 has counter weights where the 26 doesn't. Any tricks in putting one in. I have seen a few done up here in Maine but can't seem to find the older gentleman that did it. They run a lot smoother. Also where can I find alum. pistons and rings for the 26 Standard? Also gasket sets. Does any one in New England states do babbiting? Thanks Link to comment Share on other sites More sharing options...
jscheib Posted November 4, 2006 Share Posted November 4, 2006 There is a guy in Mystic that does Model A engines. I will try to get that information. Also, I have a frien with a restoration shop and I will see if he can answer your questions about the engines.John Link to comment Share on other sites More sharing options...
Dave_B Posted November 11, 2006 Share Posted November 11, 2006 I think you can get the pistons from Egge machine. Look for them on the web.Dave Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now