SteamShovel1923 Posted August 21, 2006 Share Posted August 21, 2006 What year did this packard carb come off of and engine. I found this in a collection of old car parts and also I believe I have the cylinder heads for a 12cyl. packard.Thanks Dan Link to comment Share on other sites More sharing options...
SteamShovel1923 Posted August 21, 2006 Author Share Posted August 21, 2006 Here is another view. Link to comment Share on other sites More sharing options...
Ovalrace25 Posted August 29, 2006 Share Posted August 29, 2006 Same carb as the one on the 29 Packard 8 I just had in my shop. Link to comment Share on other sites More sharing options...
SteamShovel1923 Posted August 29, 2006 Author Share Posted August 29, 2006 Thanks for the info.Dan Link to comment Share on other sites More sharing options...
carbking Posted August 29, 2006 Share Posted August 29, 2006 Dan - cannot tell for sure by the picture, but the four hole mounting is 1927 or earlier. Jon. Link to comment Share on other sites More sharing options...
26pack Posted August 29, 2006 Share Posted August 29, 2006 Dan;The carb is newer than 1926 (3d series six or 2nd series 8)because the carbs from Packards in 1926 and earlier had fuelizer spark plugs in them. I don't see the spark plug in this carb. Link to comment Share on other sites More sharing options...
SteamShovel1923 Posted August 29, 2006 Author Share Posted August 29, 2006 I was told that the earlier ones did have a spark plug in them, never seen one. Here is some pictures of the six cylinder engine I found nearby, maybe a 1927? Also found nearby a 26-27 packard car all that was left was the frame, rear axle, springs, alum. floor board, drivers seat, and firewall. I am posting the pictures of the engine. All this stuff is for sale. Maybe its all tied together.Dan Link to comment Share on other sites More sharing options...
SteamShovel1923 Posted August 29, 2006 Author Share Posted August 29, 2006 Another view of engine. Link to comment Share on other sites More sharing options...
SteamShovel1923 Posted August 29, 2006 Author Share Posted August 29, 2006 Side view Link to comment Share on other sites More sharing options...
SteamShovel1923 Posted August 29, 2006 Author Share Posted August 29, 2006 Front view Link to comment Share on other sites More sharing options...
26pack Posted August 29, 2006 Share Posted August 29, 2006 I can't see any number on the engine. It should be on the right upper front part of the crankcase. It would start with the letter U. If its a 1927 4th series six, the engine number would be in the range of U95007-U125012. Link to comment Share on other sites More sharing options...
SteamShovel1923 Posted August 30, 2006 Author Share Posted August 30, 2006 Would that be on the aluminum part or higher under the water pump?Dan Link to comment Share on other sites More sharing options...
26pack Posted August 30, 2006 Share Posted August 30, 2006 Good question. Offhand I forget. But the numbers are pretty large. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now