37S2de Posted July 20, 2023 Share Posted July 20, 2023 There was a recent thread here where connecting rods for a ‘35 Dictator were being sought. Knowing that I had some rods stashed away, I went and looked and found twelve rebabbited rods with the number 186606. The caps don’t have any numbers. I can’t find 186606 in my late 30’s parts book, so I suspect it is a casting number, not a part number. Two questions 1. Does anyone know what these rods fit? 2. Does anyone here need these rods? I have no use for them and do not remember why I bought them. I figured I would see if anyone needed them before I set them down at the end of the driveway with other scrap metal for the roving scrap metal scroungers to haul away Tom Link to comment Share on other sites More sharing options...
Henry Holt Posted July 20, 2023 Share Posted July 20, 2023 How long are they center to center hole? Link to comment Share on other sites More sharing options...
37S2de Posted July 21, 2023 Author Share Posted July 21, 2023 Certainly not a precision measurement, and the camera angle throws it off, but I’m seeing 8.125 center to center. If more precise measurement is needed let me know. Tom Link to comment Share on other sites More sharing options...
edinmass Posted July 21, 2023 Share Posted July 21, 2023 A small end photo would help. Showing bushing or not/ and clamp or full floating. That have very little value. 1 Link to comment Share on other sites More sharing options...
37S2de Posted August 3, 2023 Author Share Posted August 3, 2023 Sorry this took so long, but here is a small-end view Tom Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now