Wanted 1921 EJ clutch friction disc

[Paul schaefer]

Anyone know of a source for the friction disc for a 1921 Light 6 clutch?  Also need the rubber discs for the universal joints.  Thank You, Paul

[Stude Light]

The clutch takes two friction discs and they are loose in the clutch pack creating 4 friction surfaces.  The original setup looks like this but with two friction discs. Yes, they are supposed to be split and fit into the potted flywheel.

Many people, myself included, just have two friction disks riveted to the hub like a standard flat plate clutch. You can have any clutch service company do that for you.

 

[Stude Light]

6 hours ago, Paul schaefer said:

Also need the rubber discs for the universal joints.

Marv Ribbich ( @mribbich@wi.rr.com or 1-262-392-2989) had these in the past or you can make your own from "conveyor" material.

Scott

 

[Paul schaefer]

Thank You!  I appreciate the help.  Paul

[J Tryloff]

If you still need these, I'm having two made for my 24 special six. I'm not sure if the dimensions are the same, but if you verify your disk ID and od, in sure they could make a few more.  

[Paul schaefer]

Thank you, I could use a set.  I sent a PM through the system.  My discs measure 10" outside and 8 1/2" inside.