Can anyone identify this windshield frame?

[sagefinds]

It's the flat style,41 1/2" wide,13" tall at the ends counting the bottom half of the hinge,10" in the center,8 11/16" in center between the frames.The hinge is the style where both edges are curled and one goes inside the other.  Appreciate any help.

[28 Chrysler]

1929 Dodge DA ?

[sagefinds]

On 2/27/2023 at 10:25 AM, 28 Chrysler said:

1929 Dodge DA ?

I compared it to a 30 Dodge coupe body here and if the lower corners were rounder,it would fit. Looks to have the same hinge and holes for mounting it to the header are spaced exactly the same. So it's Mopar,probably Dodge,maybe a year or two earlier or later. Thanks 28Chrysler,that helped.

[60ch]

39 minutes ago, sagefinds said:

I compared it to a 30 Dodge coupe body here and if the lower corners were rounder,it would fit. Looks to have the same hinge and holes for mounting it to the header are spaced exactly the same. So it's Mopar,probably Dodge,maybe a year or two earlier or later. Thanks 28Chrysler,that helped.

You will find that the DA model Dodge used 2 different windshields. The first had less radius in the lower corners, the second had larger radius in the lower corners. I don't know when the change took place.

Terry

[sagefinds]

2 hours ago, 60ch said:

You will find that the DA model Dodge used 2 different windshields. The first had less radius in the lower corners, the second had larger radius in the lower corners. I don't know when the change took place.

Terry

Thanks Terry,That could help narrow it down.