broker-len Posted October 3, 2022 Share Posted October 3, 2022 in my parts book for 28-33 plymouth in engine section under manifold I see a part listed as manifold ferrule does any one have picture ,,,have some any info would be helpful-------------------bobnroman@yahoo.com Link to comment Share on other sites More sharing options...
32plywood Posted October 4, 2022 Share Posted October 4, 2022 are they a brass ring with a hump in the middle ??? Link to comment Share on other sites More sharing options...
broker-len Posted October 4, 2022 Author Share Posted October 4, 2022 the parts bk says they were used on pa and pb were conventional gaskets also used Link to comment Share on other sites More sharing options...
32plywood Posted October 4, 2022 Share Posted October 4, 2022 I will look I bought some years ago but did not use them. I will see if I can find them and get a picture to see if they are what you are talking about. not sure they are used with a gasket or alone --Allan Link to comment Share on other sites More sharing options...
Canadian PB Kid Posted October 4, 2022 Share Posted October 4, 2022 Near the end of this post are a few comments regard ferrules for the PB,s and PA,s Hope this helps... Dave STAY SAFE!! Link to comment Share on other sites More sharing options...
32plywood Posted October 5, 2022 Share Posted October 5, 2022 (edited) PXL_20221005_005507183.jpg(~3.2 MB)PXL_20221005_005502911.jpg(~2.7 MB)PXL_20221005_005522804.jpg(~3.3 MB)PXL_20221005_005517130.jpg(~3.5 MB)PXL_20221005_005510671.jpg(~3.4 MB) Edited October 5, 2022 by 32plywood (see edit history) Link to comment Share on other sites More sharing options...
32plywood Posted October 5, 2022 Share Posted October 5, 2022 after 2 hrs. of digging I found them Link to comment Share on other sites More sharing options...
broker-len Posted October 5, 2022 Author Share Posted October 5, 2022 Plywood thanks but can not access your linques need some sort of password Link to comment Share on other sites More sharing options...
32plywood Posted October 5, 2022 Share Posted October 5, 2022 they are pictures --- I can click on them and they open-- will check into it --Allan Link to comment Share on other sites More sharing options...
32plywood Posted October 5, 2022 Share Posted October 5, 2022 1 Link to comment Share on other sites More sharing options...
broker-len Posted October 5, 2022 Author Share Posted October 5, 2022 Thank your Allan I think that is what I have want to use them on a Plymouth PA they fit a bit lose when holding on the block and manifold so not sure how to hold them in place wile putting every thing together have you ever used them ? were they make be victor ? Link to comment Share on other sites More sharing options...
32plywood Posted October 6, 2022 Share Posted October 6, 2022 so I have never use them --but I would think that they would be used with a gasket due to the way the manifold seals to the block. the hump in the middle is about as thick as the gasket on the ring. -- Allan Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now