Jump to content

1950 Buick Brake Pedal Floorboard’Seal’


Kartman01
 Share

Recommended Posts

Hi all, I have a 1950 Buick wagon and am trying to figure out how the brake pedal around at the floorboard.

 

From what I can tell - other than carpet - there is nothing there.

 

A sketch or drawing of some kind would be very helpful.

 

Thanks!

Link to comment
Share on other sites

So with the carpet up you are looking at a large square hole in the floor and you can easily see the pedal linkage going to the clutch and master cylinder (and the ground)? I am not sure about 1950 cars but my 40 and 38 both have a small rectangular metal panel with 2 holes for the pedal shafts with slots cut above them. You slide the cover over the shafts and it screws down onto the floor pan.

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...