Matt56 Posted May 20, 2022 Share Posted May 20, 2022 Hi, New member here in Australia recommissioning a '63 Riviera that has been out here since near new. Looking for LH and RH steering uprights. The wheel bearings have been moving on the originals and are damaged. I'm located in Australia so would ideally like to find them here but will pay freight from the US and not likely to find them here. Thank you. Matt Link to comment Share on other sites More sharing options...
EmTee Posted May 20, 2022 Share Posted May 20, 2022 Could a machine shop knurl the worn area to make it snug again? Link to comment Share on other sites More sharing options...
NailheadBob Posted May 20, 2022 Share Posted May 20, 2022 (edited) Matt, The same part you need also fit 1961 thru 1964 LeSabre, Invicta, Riviera , Electra, I hope this helps. Bob Edited May 20, 2022 by NailheadBob Added photo (see edit history) 1 Link to comment Share on other sites More sharing options...
60FlatTop Posted May 20, 2022 Share Posted May 20, 2022 You might check to see if you can make a repair with a Tim ken Redi-Sleeve. Even if you had to machine it down a small amount, although I don't think you would. Go directly to a bearing supplier if you can. They can help. https://www.timken.com/products/timken-mechanical-power-transmission-products/seals/redi-sleeves/ 1 Link to comment Share on other sites More sharing options...
Matt56 Posted May 23, 2022 Author Share Posted May 23, 2022 Thanks very much for the replies. Some things to think about there. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now