TheHotRodBuick Posted November 26, 2021 Share Posted November 26, 2021 Does anyone know where I could purchase a driver's side window regulator for my 32 sedan model 67? I have about 8 or 10 teeth that are stripped , so the window won't go all the way up. Does anyone know if these are interchangeable with other makes or models of cars ? Can they be purchased aftermarket? Thanks . Link to comment Share on other sites More sharing options...
Jim Nelson Posted November 26, 2021 Share Posted November 26, 2021 I bumped into a guy who has a bunch of early Buick 30's parts. His name is Richard Bradley . California. e-mail is desoto6x2@aol.com. Give him a shot. I talked with him about two years ago. My requirements were a bit out of the ordinary so he could not help me. Link to comment Share on other sites More sharing options...
CTCV Posted December 3, 2021 Share Posted December 3, 2021 I will have a look and see if the window regs are still here. I have 1932 series 90 headlight lenses and can measure them if you like. They are not flat in 32. Tony Link to comment Share on other sites More sharing options...
chuckfmtexas Posted December 4, 2021 Share Posted December 4, 2021 Mac Blair has had 32 parts for years. Buick32@comcast Or 724 840 4481 chuck Nixon Link to comment Share on other sites More sharing options...
CTCV Posted December 5, 2021 Share Posted December 5, 2021 Link to comment Share on other sites More sharing options...
TheHotRodBuick Posted December 8, 2021 Author Share Posted December 8, 2021 On 12/5/2021 at 5:29 PM, CTCV said: That appears to be exactly what I need. Link to comment Share on other sites More sharing options...
CTCV Posted December 8, 2021 Share Posted December 8, 2021 You should notice they are two different items as far as the arms. I have a 32 Series 90. I am not sure which is front and which is back. Can you take a picture of yours? Also I have two lenses for my car but because they are hard to find, and mine are near perfect, I made fakes to put on my car and store the originals. I cannot see parting with them as I think it is best they stay with my car. But I can provide pictures and measurements. I am in need of Buick tail lights if you have any. Tony Link to comment Share on other sites More sharing options...
TheHotRodBuick Posted December 9, 2021 Author Share Posted December 9, 2021 21 hours ago, CTCV said: You should notice they are two different items as far as the arms. I have a 32 Series 90. I am not sure which is front and which is back. Can you take a picture of yours? Also I have two lenses for my car but because they are hard to find, and mine are near perfect, I made fakes to put on my car and store the originals. I cannot see parting with them as I think it is best they stay with my car. But I can provide pictures and measurements. I am in need of Buick tail lights if you have any. Tony Hi Tony . I'll take the door apart this weekend and have a good look. It should be the one on the left. Ill take a look .. I believe I have 1 tail light in a box somewhere. Link to comment Share on other sites More sharing options...
TheHotRodBuick Posted December 9, 2021 Author Share Posted December 9, 2021 On 12/3/2021 at 9:34 PM, chuckfmtexas said: Mac Blair has had 32 parts for years. Buick32@comcast Or 724 840 4481 chuck Nixon I tried the email and it didn't work .. it bounced back to me. Thanks though Link to comment Share on other sites More sharing options...
CTCV Posted December 10, 2021 Share Posted December 10, 2021 17 hours ago, TheHotRodBuick said: Hi Tony . I'll take the door apart this weekend and have a good look. It should be the one on the left. Ill take a look .. I believe I have 1 tail light in a box somewhere. Ok , these are the only ones I have so if neither is the exact arm you need but the quadrant (I think that is what they call the teeth section) is a match I can cut both plates (your original and mine) one inch below the teeth on the same radius and weld my teeth to your plate. But lets keep our fingers crossed. My guess is you have the same skill level to do the same. It is possible that both quadrants on my arms are identical so if you decide to replace just the teeth section onto your quadrant I'll send you both. Just in case you have a mishap need a spare. Tony Link to comment Share on other sites More sharing options...
TheHotRodBuick Posted December 13, 2021 Author Share Posted December 13, 2021 On 12/10/2021 at 10:02 AM, CTCV said: Ok , these are the only ones I have so if neither is the exact arm you need but the quadrant (I think that is what they call the teeth section) is a match I can cut both plates (your original and mine) one inch below the teeth on the same radius and weld my teeth to your plate. But lets keep our fingers crossed. My guess is you have the same skill level to do the same. It is possible that both quadrants on my arms are identical so if you decide to replace just the teeth section onto your quadrant I'll send you both. Just in case you have a mishap need a spare. Tony The one on the left is what I would need . Link to comment Share on other sites More sharing options...
CTCV Posted December 13, 2021 Share Posted December 13, 2021 Send me an address and Ill get it off to you. Link to comment Share on other sites More sharing options...
TheHotRodBuick Posted December 14, 2021 Author Share Posted December 14, 2021 3 hours ago, CTCV said: Send me an address and Ill get it off to you. Sent you a message. 😁 Link to comment Share on other sites More sharing options...
TheHotRodBuick Posted December 24, 2021 Author Share Posted December 24, 2021 Still looking if anyone has the driver's side regulator available. Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now