Mike Mowen Posted October 18, 2021 Share Posted October 18, 2021 (edited) In search of speedometer, oil and amp gauges, ignition and light switch, dash light and hood latch’s. I do have the the ignition and light assembly but the key lock is missing. I also have both gauges but the glass lenses are shattered so if anyone knows if these items can be refurbished id go that rout to stay with original equipment. Edited October 18, 2021 by Mike Mowen (see edit history) Link to comment Share on other sites More sharing options...
dibarlaw Posted October 20, 2021 Share Posted October 20, 2021 (edited) Mike: I searched for the correct gages for my 1925 standard and had to do a bit of restoration on them to clean up the faces. The bezels were sent out to be re-nickled and I had to cut new glass and make gaskets. It is doable with patients. I believe I made a fixture for removing and reseting the bezels. Carefully working around with a Sloyd knife to remove the bezel. I believe clock and instrument repairmen have better devices. I bored a hole in a hardwood block with a split cut to clamp the body. Then made a wood form to press the bezel /glass/gasket assembly back on. Using my drill press. Edited October 20, 2021 by dibarlaw Added content (see edit history) 1 Link to comment Share on other sites More sharing options...
Mike Mowen Posted October 21, 2021 Author Share Posted October 21, 2021 Thank you for sharing…. I like challenges so I’m going to follow your suggestions….you did a great job restoring your gauges. Link to comment Share on other sites More sharing options...
1912Staver Posted October 21, 2021 Share Posted October 21, 2021 A Sloyd knife, it's been a while since I have heard that term. 1 Link to comment Share on other sites More sharing options...
dibarlaw Posted October 22, 2021 Share Posted October 22, 2021 Teaching Industrial Arts for 30 years shows up once and a while. The previous system was known as Manual Arts. Before that the Sloyd system. Now it is reduced to STEM. One of the first lessons we were to teach was the sharpening and honing of the students assigned Sloyd Knife. It was used for everything cutting, trimming, layout work in wood leather etc. In todays education environment one can not fathom assigning middle school age students a knife to care for. 1 Link to comment Share on other sites More sharing options...
Mike Mowen Posted October 23, 2021 Author Share Posted October 23, 2021 3 hours ago, dibarlaw said: Teaching Industrial Arts for 30 years shows up once and a while. The previous system was known as Manual Arts. Before that the Sloyd system. Now it is reduced to STEM. One of the first lessons we were to teach was the sharpening and honing of the students assigned Sloyd Knife. It was used for everything cutting, trimming, layout work in wood leather etc. In todays education environment one can not fathom assigning middle school age students a knife to care for. When I was in high school for wood shop we were allowed to bring in shot guns and rifles to refinish the stocks and Refinish and blue the barrels. I remember carrying my rifle in the case through the school hallways to my locker. It’s amazing how things have changed. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now