Flywheel removal?

[Todd B 1928]

Trying to get the flywheel  off my 1928 four-door sedan. Removed all six bolts and tapped on it like normal. Kind of even hit it hard, and it still won’t pop off. Am I missing something? Second question does anyone know the cubic inch of this engine?

 

 Thanks, 

[Ron Lawson]

What model , 4 or 6 pots?

[Todd B 1928]

I’m a carpenter so I’m not sure what the pot is. But if you’re talking cylinders it is a six cylinder

[Ron Lawson]

If you have a Standard or a Victory the engine is 208.5 cubic inches If you have a Senior its 224 cubic inches  

[Mattml430]

14 hours ago, Todd B 1928 said:

Trying to get the flywheel  off my 1928 four-door sedan. Removed all six bolts and tapped on it like normal. Kind of even hit it hard, and it still won’t pop off. Am I missing something? Second question does anyone know the cubic inch of this engine?

 

 Thanks, 

If you’ve got a puller put some tension on it and try and ring it of by giving it a hit around the outside flat area. Let it ring between hits. Spray as much penetrating fluid in and around it as you can. 

[Todd B 1928]

Thank you for your help 

[Todd B 1928]

Got it off. Thanks