Str8-8-Dave Posted May 8, 2019 Share Posted May 8, 2019 (edited) I'm looking for a set of hinge pivot pin brackets that the door hinge pivots from for my 1931 Buick model 8-66S special coupe. These parts are actually staked to the pivot pin so that the door half of the hinge, hinge pin and these brackets were permanently assembled, then loaded into and screwed to the housing that attaches to the door post in the car. I'm including pictures of a complete hinge (picture 1) a housing with the pivots attached without the door part of the hinge because the hinge pin was broken off at the staking point (picture 2) and just the pivot brackets (picture 3) a 4th possibility (not pictured) would be the door portion of the hinge and the pivot brackets staked together without the housing. I will take any of the possible combinations as long as I get the 2 pivot pin brackets shown in picture 3. I have one complete functional hinge and all the parts to make the other except the hinge pivot pin brackets in picture 3. Thanks! Dave Krugler BCA #20435 Port Huron, MI Edited May 8, 2019 by Str8-8-Dave add pictures (see edit history) Link to comment Share on other sites More sharing options...
Robert Engle Posted May 9, 2019 Share Posted May 9, 2019 Looks like a fabrication project to me. Bob Engle 1 Link to comment Share on other sites More sharing options...
Str8-8-Dave Posted May 9, 2019 Author Share Posted May 9, 2019 (edited) Here are some additional pictures and part dimensions for the hinge and pivot pin brackets. To reiterate, the parts I need are the 2 pivot pin brackets shown in picture 1 of this post and picture 3 of the original post but if you have a complete hinge, just the housing with the pivot brackets still screwed in place or the door half of the hinge with pivot brackets staked on I will take any of those combinations or just the pivot pin brackets. Picture 1: Pivot pin offset from top surface of bracket to pin center = 1-1/16" Picture 2: Hinge housing height = 1-3/8" Picture 3: Hinge housing long side = 3-1/2" Picture 4: Hinge housing narrow side = 1-1/2" Picture 5: Hinge door bracket long side = 2-5/8" Picture 6: Hinge door bracket narrow side = 1-5/16" Edited May 9, 2019 by Str8-8-Dave add pictures (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now