Findareatta Posted April 3, 2018 Share Posted April 3, 2018 (edited) My cruise works fine but I've found the vacuum hose and fitting has came out of the servo unit. I will push it back in tight but in about a month it will come out again. I have tried gluing the fitting in the servo unit with super glue but seems to come out again. Is there a lot of air pressure that makes this vacuum line disconnect or is there a method to keep the vacuum hose and fitting stay in the servo unit for the cruise control? Any comments? Edited April 4, 2018 by Findareatta (see edit history) Link to comment Share on other sites More sharing options...
DAVES89 Posted April 3, 2018 Share Posted April 3, 2018 Replace the unit. Any one of the vendors listed above should have it or you could try a salvage yard. Link to comment Share on other sites More sharing options...
2seater Posted April 3, 2018 Share Posted April 3, 2018 I imagine the "round canister" is the vacuum reservoir located near the cruise control on the frame? I agree with Dave, it should be replaced. Link to comment Share on other sites More sharing options...
NCReatta Posted April 7, 2018 Share Posted April 7, 2018 Sounds like your hose is too large. It should be a 5/32" hose. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now